SPIRIT AEROSYSTEMS INC - NADCAP Approved
90053043
Independent Processor
3801 S OLIVER ST
WICHITA , KS 67210 United States
Phone: 13165235351
Fax: 316-526-1102
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None
ACS-PRS-1151
Welding of Tubular Joints
Welding
Limits:
None
ACS-PRS-2004
Structural Adhesive Bonding with Epoxy Paste Adhesive
Composites
Limits:
Room temperature cure only
ACS-PRS-2151
Process Specification for Sealing, Integral Fuel Tank and Fuel Cell Cavity
Finishes/Coatings
Limits:
Limited to Pre-measured sealant dispensing cartridges (Sem kits)
ACS-PRS-2204
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
Limited to Type 1 process; Oxide removal from titanium and titanium alloy surfaces limited to Scuff Sanding and/or Grit Blasting; Excludes BAMS Program
ACS-PRS-4504
Assembly of Threaded and Welded Fittings. *NOTE* ASPL approval is not required for assembly of Class A Threaded Connections. Qualification and ASPL approval is required for Class B Welded Connections.
Miscellaneous
Limits:
None
ACS-PRS-5001
Curing Procedures for Composite Laminates and Sandwich Assemblies
Composites
Limits:
None
ACS-PRS-5012
Process Specification for Wet Layup of Composite Laminates and Foam Sandwich Structures
Composites
Limits:
Limited to Type IV process only. Limited to non-critical, non-structural wet lay up
ACS-PRS-5012.04
PROCESS SPECIFICATION FOR WET LAYUP OF CARBON FABRIC FIBERGLASS FABRIC OR COPPER MESH ON CURED COMPOSITE SURFACES
Composites
Limits:
Limited to noncritical, nonstructural wet lay up
ACS-PRS-5017
Process Specification Fabrication of Out-of-Autoclave, 350°F Cure, Epoxy Laminates
Composites
Limits:
None
ACS-PRS-5018
Process Specification for Fabrication of Pi Joint Composite Structures Utilizing 350°F Curing Out-of-Autoclave Materials
Composites
Limits:
None
ACS-PRS-5018.02
Process Specification For Fabrication Of Current Carrying PI Joint Structures For Lightning Arc Mitigation
Composites
Limits:
Limited to Method 1
ACS-PRS-5020
Specification for Out-of-Autoclave Fiber Placed Carbon Epoxy Laminates, Fabrication and Acceptance of
Composites
Limits:
None
ACS-PRS-5053
Machining of Nonmetallic Honeycomb Details
Composites
Limits:
To ‘Repairs’ Only
ACS-PRS-5065
Process Specification for Fabrication Of 350°F Curing Out-Of-Autoclave Epoxy Composite Structure, Bonded, Cocured, Or Cobonded
Composites
Limits:
None
ACS-PRS-5065.02
Installing Inserts, Hardpoints, and Edge Filler in Composite Sandwich Structure
Composites
Limits:
None
ACS-PRS-6002.01
Process Specification for Contamination Free Hole Preparation, Drilling, Machining and Trimming of Composites and Composite/Metallic Structures
Composites
Limits:
None
ACS-PRS-7001
Ultrasonic Inspection of Composites and Bonded Assemblies
Non-Destructive Testing
Limits:
None
ACS-PRS-7003
Eddy Current Inspection for Defects
Non-Destructive Testing
Limits:
None
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
Excludes Appendices
ACS-PRS-7101
Non-Destructive Inspection of Composite Structures
Non-Destructive Testing
Limits:
None
ACS-PRS-8002
Area Requirements for Composite Fabrication
Composites
Limits:
None
ACS-PRS-8002.01
Process Specification for Area Requirements for Adhesive Bonding and Composite Fabrication of PI, Green Tie and Splice Joint Primary Structures (Controlled Bonding Area)
Composites
Limits:
None
AMS 2770
Heat Treatment of Wrought Aluminum Alloy Parts
Heat Treat
Limits:
None
AMS 2801
Heat Treatment of Titanium Alloy Parts
Heat Treat
Limits:
Stress Relief only. Limited to vacuum furnaces 21B, 58B, and 059F
AWS D17.1
Fusion Welding for Aerospace Applications
Welding
Limits:
Limited to GTAW process; Material Groups VI
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Type 1 only