Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

  • Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
  • All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
  • At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.
    • First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
    • Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
    • The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.
For any questions, contact:

Warning:    Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

 


 
MORRELL'S ELECTRO PLATING INC - NADCAP Approved
90051812
Independent Processor
432 E EUCLID AVE
COMPTON , CA 90222-2810 United States
Phone: 323-636-1004
Fax: 310-369-1025
Selected sector: AS

Specification
Process Description
Category
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
In-house testing only

Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None

Cleaning Prior to Inspection
Chemical Processing
Limits:
Limited method 1 and 2 only. (Ref. RC/I #BR121077)

Primer MIL-P-85582, Epoxy, Voc Compliant, Application of
Chemical Processing
Limits:
None

Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None

Sulfuric Acid Anodic Coatings for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Approved RCI BR120971

Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Aluminum and Titanium only

Integral Fuel Tank Coating (MILC27725) Application of
Chemical Processing
Limits:
None

Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Limited to Ambient Air Cure only

Coating, Polyurethane, Application of
Chemical Processing
Limits:
None

Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None

Penetrant Inspection
Non-Destructive Testing
Limits:
None

Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
Non-critical parts only

Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Titanium etch per approved RC/I R 189844

Conversion Coating of Titanium Alloys
Chemical Processing
Limits:
Processing per approved RC/I R189845

Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limits: Type I only

Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings.