| Specification | ProcessDescription | Category | SpecLimits |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: In-house testing only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| C-17 | Cleaning Prior to Inspection | Chemical Processing | Limits: Limited method 1 and 2 only. (Ref. RC/I #BR121077) |
| FP-153 | Primer MIL-P-85582, Epoxy, Voc Compliant, Application of | Chemical Processing | Limits: None |
| FP-28 | Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys | Chemical Processing | Limits: None |
| FP-59 | Sulfuric Acid Anodic Coatings for Aluminum and Aluminum Alloys | Chemical Processing | Limits: Approved RCI BR120971 |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: Limited to Aluminum and Titanium only |
| GSS 4306 | Integral Fuel Tank Coating (MILC27725) Application of | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Limited to Ambient Air Cure only |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| IT-60 | Penetrant Inspection | Non-Destructive Testing | Limits: None |
| LMA-PC201 | Fluorescent Penetrant Inspection of Metallic Parts & Materials | Non-Destructive Testing | Limits: Non-critical parts only |
| LMA-PG001 | Etch/Cleaning Prior to Penetrant Inspection | Chemical Processing | Limits: Titanium etch per approved RC/I R 189844 |
| LMA-PH016 | Conversion Coating of Titanium Alloys | Chemical Processing | Limits: Processing per approved RC/I R189845 |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limits: Type I only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings. |