FINE QUALITY METAL FINISHING -
NADCAP Approved
90076059
Independent Processor
1640 Daisy Ave.
Long Beach, CA 90813 United States
Phone: 562-432-2248
Fax:
90076059
Independent Processor
1640 Daisy Ave.
Long Beach, CA 90813 United States
Phone: 562-432-2248
Fax:
Selected sector: AS
Specification
ProcessDescription
Category
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing types
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to BR211348, BR211872 for alternate solutions
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
Limited to Type 1 only
and RC/I BR 211357 &
BR 211350
Penetrant Inspection
Non-Destructive Testing
Limits:
None
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Method 1, Type 2, 6, 7, & 8
Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
None
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification. Superseding MIL-PRF-46010 for Types I & II only
Chemical Processing
Limits:
None
Cleaning, Descaling, and Passivation of Stainless Steel
Chemical Processing
Limits:
None
Standard Practice for Operating Salt Spray (Fog) Apparatus
Chemical Processing
Limits:
None
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
Magnetic Particle Inspection Procedures
Non-Destructive Testing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
Hardness and Conductivity Testing
Miscellaneous
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
Conversion Coating of Titanium Alloys
Chemical Processing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
Application and Control of Organic Finishes
Chemical Processing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
Dry Film Lube
Superseded by AS5272 for Ty I & II only
Chemical Processing
Limits:
None
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Supplier has diluted chromate, dichromate, & hot DI water seal
Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
Pre-penetrant etch solution approved per RC/I 212213A