| Specification | ProcessDescription | Category | SpecLimits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| 29259-24 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing types | |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: Limited to BR211348, BR211872 for alternate solutions |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Limited to Type 1 only and RC/I BR 211357 & BR 211350 |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: None |
| ACS-PRS-7010 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method 1, Type 2, 6, 7, & 8 |
| AMS-QQ-P-416 | Plating, Cadmium (Electrodeposited). | Chemical Processing | Limits: None |
| ASTM A380 | Cleaning, Descaling, and Passivation of Stainless Steel | Chemical Processing | Limits: None |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: Limited to In-house testing only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| LMA-PC009 | Hardness and Conductivity Testing | Miscellaneous | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 |
| LMA-PC201 | Fluorescent Penetrant Inspection of Metallic Parts & Materials | Non-Destructive Testing | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 |
| LMA-PG001 | Etch/Cleaning Prior to Penetrant Inspection | Chemical Processing | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 |
| LMA-PJ264 | Application and Control of Organic Finishes | Chemical Processing | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-46010 | Dry Film Lube Superseded by AS5272 for Ty I & II only | Chemical Processing | Limits: None |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when MIL-PRF-8625 Type II anodize is called out on engineering drawings. |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: Pre-penetrant etch solution approved per RC/I 212213A |
| MPD 1103 | Cleaning of Titanium and Titanium Alloys | Chemical Processing | Limits: Pre-penetrant etch solution approved per RC/I 212214 |
| MPD 1183 | Pickling of Precipitation-Hardening Steel | Chemical Processing | Limits: Pre-penetrant etch solution approved per RC/I 212215 |