HIXSON METAL FINISHING - NADCAP Approved
90055274
Independent Processor
829 PRODUCTION PL
NEWPORT BEACH , CA 92663 United States
Phone: 8009009798
Fax: 949-645-0534
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
29259-18
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
29259-24
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
2ZZP00001
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
None
ACS-PRS-7010
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
AMS 2404
Plating, Electroless Nickel
Chemical Processing
Limits:
None
AMS 2485
Coating - Black Oxide for Ferrous Alloys
Chemical Processing
Limits:
None
AMS 2700
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Method 1, Types 2, 6, and 7 only
AMS-QQ-P-416
Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
None
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
Internal processing only
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
ASTM E1444
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
F-101
Chemical Conversion Coating for Aluminum
Chemical Processing
Limits:
None
F-102
Sulfuric Acid Anodic Coatings for Aluminum Alloys
Chemical Processing
Limits:
None
F-116
Passivating CRES Alloys.
Chemical Processing
Limits:
AMS2700 Type 2, 6, or 7 can be used
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Air dry only. Approval required approval for force dry
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
LMA-PJ264
Application and Control of Organic Finishes
Chemical Processing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Type 1 only unless specified on NGAS drawings
MIL-PRF-46010
Dry Film Lube Superseded by AS5272 for Ty I & II only
Chemical Processing
Limits:
None
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Dichromate seal is required when Mil-PRF-8625 anodize is called out on engineering drawings.
MPD 1074
Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
None
T-103
Penetrant Inspection
Non-Destructive Testing
Limits:
None
T-104
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None