| Specification | ProcessDescription | Category | SpecLimits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| 29259-24 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 | |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: None |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: None |
| ACS-PRS-7010 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| AMS 2404 | Plating, Electroless Nickel | Chemical Processing | Limits: None |
| AMS 2485 | Coating - Black Oxide for Ferrous Alloys | Chemical Processing | Limits: None |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method 1, Types 2, 6, and 7 only |
| AMS-QQ-P-416 | Plating, Cadmium (Electrodeposited). | Chemical Processing | Limits: None |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: Internal processing only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| F-101 | Chemical Conversion Coating for Aluminum | Chemical Processing | Limits: None |
| F-102 | Sulfuric Acid Anodic Coatings for Aluminum Alloys | Chemical Processing | Limits: None |
| F-116 | Passivating CRES Alloys. | Chemical Processing | Limits: AMS2700 Type 2, 6, or 7 can be used |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Air dry only. Approval required approval for force dry |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| LMA-PJ264 | Application and Control of Organic Finishes | Chemical Processing | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Type 1 only unless specified on NGAS drawings |
| MIL-PRF-46010 | Dry Film Lube Superseded by AS5272 for Ty I & II only | Chemical Processing | Limits: None |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when Mil-PRF-8625 anodize is called out on engineering drawings. |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: None |
| T-103 | Penetrant Inspection | Non-Destructive Testing | Limits: None |
| T-104 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |