BARNES GROUP INC - NADCAP Approved
90049034
Independent Processor
1025 S. Depot Drive
OGDEN , UT 84404 United States
Phone: 8019172088
Fax: 801-917-2033
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
2ZZP00013
Fusion Welding
Welding
Limits:
Limits: Limited to Group VI, Titanium
AMS 2801
Heat Treatment of Titanium Alloy Parts
Heat Treat
Limits:
Limited to stress relief only
AMS-H-81200
Heat Treatment of Titanium and Titanium Alloys
Heat Treat
Limits:
None
AMS-W-6858
Welding, Resistance: Spot and Seam
Welding
Limits:
None
ASTM B600
Descaling & Cleaning Titanium and Titanium Alloy Surfaces
Chemical Processing
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
ASTM E1742
Standard Practice for Radiographic Examination
Non-Destructive Testing
Limits:
None
AWS D17.1
Fusion Welding for Aerospace Applications
Welding
Limits:
Limited to GTAW for Groups III & VI. Visual weld inspectors qualified to AWS B5.2
AWS D17.2
Resistance Welding for Aerospace Applications
Welding
Limits:
No Limits. Visual weld inspectors are qualified to AWS B5.2
EPFS-322
Forming and Straightening of Titanium Alloys
Miscellaneous
Limits:
None
GP 17 G
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Titanium alloys
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Reference Force dry RCI #BR020920
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
GSS 5360
Forming of Titanium and Titanium Alloys
Miscellaneous
Limits:
None
GSS 5361
Superplastic Forming of Ti-6Al-4v Titanium Alloy
Miscellaneous
Limits:
None
GSS 7015
Cleaning and Descaling of Titanium and Titanium Alloys
Chemical Processing
Limits:
Limited to Methods 1, 2, 3, 4 & 7 only
GT 23 A
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
LMA-PC201
Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
The following personnel met the requirements for initial and requalification:Cindy Glisson….Employee # 900830 …stamp #4 Joe Daniels...Employee # 667025…stamp # 12 This task was accomplished using procedure # FPS 51.11, Addendum N, Revision 5, released 02/04/2016 and PT General Procedure FPS 51.11, Revision 51, released 02/17/2020 Processing of Critical Parts as defined by LMA-PC201 is limited to those individuals named above. Expires 01/2025.
LMA-PC301
Radiographic Inspection
Non-Destructive Testing
Limits:
None
LMA-PG001
Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to titanium parts only