Sullivan Precision Metal Finishing - NADCAP Approved
90053143
Independent Processor
995 North Service Road West
Sullivan, MO 63080 United States
Phone: (573) 468-8049
Fax: (573) 468-2182
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None
ACS-PRS-2204
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
None
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
Type I, Method A, Sensitivity Level 3, Form d Excludes Appendix A
AMS 2700
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Conduct Method 1 only
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
Type I, Method A, Sensitivity Level 3, Form d
ASTM E1444
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
F-102
Sulfuric Acid Anodic Coatings for Aluminum Alloys
Chemical Processing
Limits:
Pre-cleaning and chemical controls per RCI 199465
GP 17 G
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
None
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Force Cure per RCI 648978 A
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
GT 23 A
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
Type I, Method A, Sensitivity Level 3, Form d
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
MIL-PRF-46010
Dry Film Lube Superseded by AS5272 for Ty I & II only
Chemical Processing
Limits:
None
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Dichromate seal is required when Mil-PRF-8625 called out on engineering drawings.
T-103
Penetrant Inspection
Non-Destructive Testing
Limits:
Type I, Method A, Sensitivity Level 3, Form d