| Specification | ProcessDescription | Category | SpecLimits |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: None |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: None |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Type I, Method A, Sensitivity Level 3, Form d Excludes Appendix A |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method 1 only |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: Type I, Method A, Sensitivity Level 3, Form d |
| F-102 | Sulfuric Acid Anodic Coatings for Aluminum Alloys | Chemical Processing | Limits: Pre-cleaning and chemical controls per RCI 199465 |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Force Cure per RCI 648978 pending approval |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: Type I, Method A, Sensitivity Level 3, Form d |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-46010 | Dry Film Lube Superseded by AS5272 for Ty I & II only | Chemical Processing | Limits: None |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when Mil-PRF-8625 called out on engineering drawings. |
| T-103 | Penetrant Inspection | Non-Destructive Testing | Limits: Type I, Method A, Sensitivity Level 3, Form d |