Bowman Plating Company Inc - NADCAP Approved
90049168
Independent Processor
2631 E 126th St
Compton, CA 90222 United States
Phone: (310) 639-4343 EXTN 152
Fax: (310) 639-3577
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
29259-18
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
Limited to Sensitivity Level III Penetrant, Durability Critical and non-critical only
29259-24
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None
ACS-PRS-2204
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
Limited to Type I only. Ref. RCI R 201611 for alternate solutions
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
Limited to Sensitivity Level III Penetrant, Durability Critical and non-critical only
ACS-PRS-7010
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
AMS 2486
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
Finishes/Coatings
Limits:
None
AMS 2700
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Limited to Method 1, Type; 2, 6, 7, & 8
AMS-QQ-P-416
Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
Limited Type I and II without supplementary phosphate treatment.
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
ASTM E1444
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
C-17
Cleaning Prior to Inspection
Chemical Processing
Limits:
Limited to Method 1& 2
FP- 2
Cadmium Plating (Less Than 220,000psi) by Electrodeposition
Chemical Processing
Limits:
None
FP-153
Primer MIL-P-85582, Epoxy, Voc Compliant, Application of
Chemical Processing
Limits:
None
FP-28
Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
FP-59
Sulfuric Acid Anodic Coatings for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
FP-87
Sulfuric Acid Anodizing of Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
GP 17 G
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Aluminum Alloy Parts
GSS 4306
Integral Fuel Tank Coating (MILC27725) Application of
Chemical Processing
Limits:
None
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Force Cure approved per RCI 643362
GSS 4407
Application of Lacquers: Acrylic
Chemical Processing
Limits:
GP110 H, acrylic lacquer was authorized to be substituted by GP 20A polyurethane per GS30BF, sheet 45.
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
GT 23 A
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
IT-60
Penetrant Inspection
Non-Destructive Testing
Limits:
None
MIL-DTL-16232
Phosphate Coating, Heavy, Manganese or Zinc Base
Chemical Processing
Limits:
None
MIL-DTL-18264
Finishes Organic, Weapons System, Application and Control of
Chemical Processing
Limits:
None
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
5% sodium or potassium dichromate seal is required when Mil-PRF-8625, Type II anodize is called out on C-2, E-2C/D, EA-6B, EA-18G or E-8 (Jstars) engineering drawings.
MPD 1074
Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
Approved for Mil-etch per RCI R106902
NGT23K
Magnetic Particle Method of Inspection for Non-Destructive Test
Non-Destructive Testing
Limits:
None