CALIFORNIA METAL PROCESSING CO - NADCAP Approved
90049333
Independent Processor
1530 W Slauson Ave
Los Angeles , CA 90047 United States
Phone: 3237532247
Fax:
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
29259-18
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
29259-24
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
2ZZP00001
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
Aluminum only
ACS-PRS-2204
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
None
ACS-PRS-7002
Temper Etch Inspection
Non-Destructive Testing
Limits:
None
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
None
ACS-PRS-7010
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
AMS 2404
Plating, Electroless Nickel
Chemical Processing
Limits:
None
AMS 2418
Copper Plating (Electrodeposited)
Chemical Processing
Limits:
None
AMS 2700
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Type 2, 6, 7, & 8
AMS 2759/11
Stress relief of steel parts
Heat Treat
Limits:
None
AMS-C-26074
Plating - Nickel - Electroless
Chemical Processing
Limits:
None
AMS-QQ-P-416
Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
None
AS5272
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification. Superseding MIL-PRF-46010 for Types I & II only
Chemical Processing
Limits:
None
ASTM A967
Chemical Passivation Treatments for Stainless Steel Parts
Chemical Processing
Limits:
None
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
ASTM E1444
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
C-17
Cleaning Prior to Inspection
Chemical Processing
Limits:
Limited to Methods 1, 2, 3, 4, 5, 7, 9, 10
C-47
Abrasive Cleaning
Chemical Processing
Limits:
None
F-127
Cadmium Plating High Strength Steels
Chemical Processing
Limits:
None
FP-153
Primer MIL-P-85582, Epoxy, Voc Compliant, Application of
Chemical Processing
Limits:
None
FP-28
Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
FP-32
Electrolytic Polishing
Chemical Processing
Limits:
None
FP-79
Passivation of Corrosion and Heat Resistant Steel and Nickel Alloys
Chemical Processing
Limits:
None
FP-92
Cadmium Plating Parts by Electrodeposition (Less Than 220,000 psi), Control
Chemical Processing
Limits:
None
FP-93
Cadmium Plating - High Strength Steels by Electrodeposition (220,000 psi
Chemical Processing
Limits:
None
GSS 19200
Nital Etch of Low Alloy Steel Parts
Non-Destructive Testing
Limits:
None
GSS 5100
Heat Treatment of Low Alloy Steel
Heat Treat
Limits:
Limited to stress relief only
GSS 8052
Cadmium Plating (Electrodeposited) for Low Alloy Steel Parts Heat Treated
Chemical Processing
Limits:
None
IT-60
Penetrant Inspection
Non-Destructive Testing
Limits:
None
IT-61
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
IT-69
Nital Etch Inspection of High Strength Steel Parts
Non-Destructive Testing
Limits:
None
L-6
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Chemical Processing
Limits:
None
L-7
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Chemical Processing
Limits:
None
LMA-PC201
Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
This facility re-qualification was conducted the week of 02/03/2022. the following personnel met the requirements:Gabriel Garcia…Stamp # 26 Kyle Andersen.. Stamp # 22; Rich Stromer….Stamp # 23 This task was accomplished using procedure and materials called out in CMP-1, Revision Z, dated 12/12/2018 Processing of “Critical Parts” as defined by LMA-PC201 is limited to those individuals named above. Next requalification due 02/28/2025
MIL-C-26074
Plating - Nickel - Electroless
Chemical Processing
Limits:
None
MIL-DTL-18264
Finishes Organic, Weapons System, Application and Control of
Chemical Processing
Limits:
None
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
MIL-F-18264
Finishes Organic, Weapons System, Application and Control of
Chemical Processing
Limits:
None
MIL-PRF-46010
Dry Film Lube Superseded by AS5272 for Ty I & II only
Chemical Processing
Limits:
None
MIL-PRF-46147
Lubricant, Solid Film, Air Cured (Corrosion Inhibiting)
Chemical Processing
Limits:
None
MIL-STD-867
Temper Etch Inspection
Non-Destructive Testing
Limits:
None
NGT23K
Magnetic Particle Method of Inspection for Non-Destructive Test
Non-Destructive Testing
Limits:
None
T-104
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None