| Specification | ProcessDescription | Category | SpecLimits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| 29259-24 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 | |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: Aluminum only |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: None |
| ACS-PRS-7002 | Temper Etch Inspection | Non-Destructive Testing | Limits: None |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: None |
| ACS-PRS-7010 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| AMS 2404 | Plating, Electroless Nickel | Chemical Processing | Limits: None |
| AMS 2418 | Copper Plating (Electrodeposited) | Chemical Processing | Limits: None |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Type 2, 6, 7, & 8 |
| AMS 2759/11 | Stress relief of steel parts | Heat Treat | Limits: None |
| AMS-C-26074 | Plating - Nickel - Electroless | Chemical Processing | Limits: None |
| AMS-QQ-P-416 | Plating, Cadmium (Electrodeposited). | Chemical Processing | Limits: None |
| AS5272 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification. Superseding MIL-PRF-46010 for Types I & II only | Chemical Processing | Limits: None |
| ASTM A967 | Chemical Passivation Treatments for Stainless Steel Parts | Chemical Processing | Limits: None |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Non-Destructive Testing | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| C-17 | Cleaning Prior to Inspection | Chemical Processing | Limits: Limited to Methods 1, 2, 3, 4, 5, 7, 9, 10 |
| C-47 | Abrasive Cleaning | Chemical Processing | Limits: None |
| F-127 | Cadmium Plating High Strength Steels | Chemical Processing | Limits: None |
| FP-153 | Primer MIL-P-85582, Epoxy, Voc Compliant, Application of | Chemical Processing | Limits: None |
| FP-28 | Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys | Chemical Processing | Limits: None |
| FP-32 | Electrolytic Polishing | Chemical Processing | Limits: None |
| FP-79 | Passivation of Corrosion and Heat Resistant Steel and Nickel Alloys | Chemical Processing | Limits: None |
| FP-92 | Cadmium Plating Parts by Electrodeposition (Less Than 220,000 psi), Control | Chemical Processing | Limits: None |
| FP-93 | Cadmium Plating - High Strength Steels by Electrodeposition (220,000 psi | Chemical Processing | Limits: None |
| GSS 19200 | Nital Etch of Low Alloy Steel Parts | Non-Destructive Testing | Limits: None |
| GSS 5100 | Heat Treatment of Low Alloy Steel | Heat Treat | Limits: Limited to stress relief only |
| GSS 8052 | Cadmium Plating (Electrodeposited) for Low Alloy Steel Parts Heat Treated | Chemical Processing | Limits: None |
| IT-60 | Penetrant Inspection | Non-Destructive Testing | Limits: None |
| IT-61 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| IT-69 | Nital Etch Inspection of High Strength Steel Parts | Non-Destructive Testing | Limits: None |
| L-6 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting | Chemical Processing | Limits: None |
| L-7 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting | Chemical Processing | Limits: None |
| LMA-PC201 | Fluorescent Penetrant Inspection of Metallic Parts & Materials | Non-Destructive Testing | Limits: This facility re-qualification was conducted the week of 02/17/2025. the following personnel met the requirements: Gabriel Garcia…Stamp # 26 Kyle Andersen.. Stamp # 22,This task was accomplished using procedure and materials called out in CMP-1, Revision Z, dated 12/12/2018 Processing of “Critical Parts” as defined by LMA-PC201 is limited to those individuals named above. Next requalification due 02/17/2028 |
| MIL-C-26074 | Plating - Nickel - Electroless | Chemical Processing | Limits: None |
| MIL-DTL-18264 | Finishes Organic, Weapons System, Application and Control of | Chemical Processing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-F-18264 | Finishes Organic, Weapons System, Application and Control of | Chemical Processing | Limits: None |
| MIL-PRF-46010 | Dry Film Lube Superseded by AS5272 for Ty I & II only | Chemical Processing | Limits: None |
| MIL-PRF-46147 | Lubricant, Solid Film, Air Cured (Corrosion Inhibiting) | Chemical Processing | Limits: None |
| MIL-STD-867 | Temper Etch Inspection | Non-Destructive Testing | Limits: None |
| NGT23K | Magnetic Particle Method of Inspection for Non-Destructive Test | Non-Destructive Testing | Limits: None |
| T-104 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |