3P PROCESSING LLC -
NADCAP Approved
90051954
Independent Processor
1702 S KNIGHT ST
WICHITA , KS 67213 United States
Phone: 3169430731
Fax: 316-943-1028
90051954
Independent Processor
1702 S KNIGHT ST
WICHITA , KS 67213 United States
Phone: 3169430731
Fax: 316-943-1028
Selected sector: AS
Specification
ProcessDescription
Category
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
Limits: Approval based on QCS-001 listing. This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing types
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
Type I only. Excludes Fluoride-Phosphate chemical conversion coatings and Appendix "A"
Penetrant Inspection
Non-Destructive Testing
Limits:
Not Approved for Appendix B
Shot Peening, Automatic
Miscellaneous
Limits:
None
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
None
Shot Peening of Metal Parts
Miscellaneous
Limits:
None
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
None
Descaling & Cleaning Titanium and Titanium Alloy Surfaces
Chemical Processing
Limits:
None
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
Primer MIL-P-85582, Epoxy, Voc Compliant, Application of
Chemical Processing
Limits:
None
Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
None
Dry Film Lubricant-Resin Bonded Tetrafluoro-Ethylene-Emralon#310- Applic'n
Chemical Processing
Limits:
None
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
None
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
Peening of Ferrous and Non-Ferrous Alloys
Miscellaneous
Limits:
None
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
Includes fracture critical hardware. The following personnel successfully completed requalification demonstration: Derek Rey (#4), Shane Velasquez (#3) Next Requalification: 08/2027
Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Aluminum and Cres only.
Touch-up Requirements for Chemical and Organic Finishes
Chemical Processing
Limits:
None
Application and Control of Organic Finishes
Chemical Processing
Limits:
None
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
5% sodium or potassium dichromate seal is required when MIL-PRF-8625, Type II anodize is called out on AEW programs: C-2, E-2C/D, EA-6B, EA-18G or E-8 (JSTARS) engineering drawings.
Magnetic Particle Method of Inspection for Non-Destructive Test
Non-Destructive Testing
Limits:
None