| Specification | ProcessDescription | Category | SpecLimits |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: Limits: Approval based on QCS-001 listing. This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing types | |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: None |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Type I only. Excludes Fluoride-Phosphate chemical conversion coatings and Appendix "A" |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Not Approved for Appendix B |
| AMS 2430 | Shot Peening, Automatic | Miscellaneous | Limits: None |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: None |
| AMS-S-13165 | Shot Peening of Metal Parts | Miscellaneous | Limits: None |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: None |
| ASTM B600 | Descaling & Cleaning Titanium and Titanium Alloy Surfaces | Chemical Processing | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| FP-153 | Primer MIL-P-85582, Epoxy, Voc Compliant, Application of | Chemical Processing | Limits: None |
| FP-28 | Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys | Chemical Processing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: None |
| GSS 10200 | Dry Film Lubricant-Resin Bonded Tetrafluoro-Ethylene-Emralon#310- Applic'n | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: None |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GSS 5310 | Peening of Ferrous and Non-Ferrous Alloys | Miscellaneous | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| LMA-PC201 | Fluorescent Penetrant Inspection of Metallic Parts & Materials | Non-Destructive Testing | Limits: Includes fracture critical hardware. The following personnel successfully completed requalification demonstration: Derek Rey (#4), Shane Velasquez (#3) Next Requalification: 08/2027 |
| LMA-PG001 | Etch/Cleaning Prior to Penetrant Inspection | Chemical Processing | Limits: Limited to Aluminum and Cres only. |
| LMA-PJ013 | Touch-up Requirements for Chemical and Organic Finishes | Chemical Processing | Limits: None |
| LMA-PJ264 | Application and Control of Organic Finishes | Chemical Processing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: 5% sodium or potassium dichromate seal is required when MIL-PRF-8625, Type II anodize is called out on AEW programs: C-2, E-2C/D, EA-6B, EA-18G or E-8 (JSTARS) engineering drawings. |
| NGT23K | Magnetic Particle Method of Inspection for Non-Destructive Test | Non-Destructive Testing | Limits: None |