Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

  • Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
  • All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
  • At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.
    • First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
    • Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
    • The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.
For any questions, contact:

Warning:    Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

 


 
ADVANCED COATING TECHNIQUES INC - NADCAP Approved
90054293
Independent Processor
311 WYANDANCH AVE
WEST BABYLON , NY 11704 United States
Phone: 6316434555
Fax: 631-643-1412
Selected sector: AS

Specification
Process Description
Category
Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
None

Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
Limited to In-house testing support only

Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None

Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None

Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Aluminum Alloy Parts and Titanium Alloy Parts

Paints - Primer, Topcoats, Dry Film Lubricants
Chemical Processing
Limits:
Everlube 620C is the Approved Product for GSS10300.

Integral Fuel Tank Coating (MILC27725) Application of
Chemical Processing
Limits:
None

Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Limited to Air Dry

Application of Lacquers: Acrylic
Chemical Processing
Limits:
Utilizing Approved Substitute - GSS 4510

Coating, Polyurethane, Application of
Chemical Processing
Limits:
None

Acid Cleaning of Ferrous Alloys
Chemical Processing
Limits:
None

Cadmium Plating (Electrodeposited) for Low Alloy Steel Parts Heat Treated
Chemical Processing
Limits:
None

Brush Plating of Ferrous and Nonferrous Alloys
Chemical Processing
Limits:
None

Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None

Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only

Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
5% Sodium Dichromate seal is required when MIL-PRF-8625 is called out for anodizing on the AEW/AGS Engineering Drawing. Limited to Type I, Type IB, Type II, Type IIB, Type III.

Magnetic Particle Method of Inspection for Non-Destructive Test
Non-Destructive Testing
Limits:
None