| Specification | ProcessDescription | Category | SpecLimits |
| AMS-QQ-P-416 | Plating, Cadmium (Electrodeposited). | Chemical Processing | Limits: None |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: Limited to In-house testing support only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: Limited to Aluminum Alloy Parts and Titanium Alloy Parts |
| GSS 10300 | Paints - Primer, Topcoats, Dry Film Lubricants | Chemical Processing | Limits: Everlube 620C is the Approved Product for GSS10300. |
| GSS 4306 | Integral Fuel Tank Coating (MILC27725) Application of | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Limited to Air Dry |
| GSS 4407 | Application of Lacquers: Acrylic | Chemical Processing | Limits: Utilizing Approved Substitute - GSS 4510 |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GSS 7021 | Acid Cleaning of Ferrous Alloys | Chemical Processing | Limits: None |
| GSS 8052 | Cadmium Plating (Electrodeposited) for Low Alloy Steel Parts Heat Treated | Chemical Processing | Limits: None |
| GSS 8060 | Brush Plating of Ferrous and Nonferrous Alloys | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: 5% Sodium Dichromate seal is required when MIL-PRF-8625 is called out for anodizing on the AEW/AGS Engineering Drawing. Limited to Type I, Type IB, Type II, Type IIB, Type III. |
| NGT23K | Magnetic Particle Method of Inspection for Non-Destructive Test | Non-Destructive Testing | Limits: None |