SEYER INDUSTRIES INC - NADCAP Approved
90052833
Independent Processor
66 PATMOS CT
SAINT PETERS , MO 63376-3903 United States
Phone: 636-928-1190
Fax: 636-928-8945
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Aluminum and Titanium only
ACS-PRS-2151
Process Specification for Sealing, Integral Fuel Tank and Fuel Cell Cavity
Finishes/Coatings
Limits:
Limited to pre-measured sealant dispensing cartridges (Semkits) Not approved for Appendix A
ACS-PRS-2204
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
Limited to acid etch only. Excludes Appendices
ACS-PRS-6002.01
Process Specification for Contamination Free Hole Preparation, Drilling, Machining and Trimming of Composites and Composite/Metallic Structures
Composites
Limits:
Limited to composite drilling only
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
Type I, Method A, Sensitivity Level 3, Form D, and Not approved for Appendix A & B.
AMS 2700
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Method 1 Type 2 & 6 only.
ASTM A967
Chemical Passivation Treatments for Stainless Steel Parts
Chemical Processing
Limits:
Nitric 1 & 2 solution only.
ASTM B600
Descaling & Cleaning Titanium and Titanium Alloy Surfaces
Chemical Processing
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
Type I, Method A, Sensitivity Level 3, Form d.
ASTM E1444
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
AWS D1.1
Structural Steel Welding - Steel
Welding
Limits:
Limited to non-flight ground support hardware only
AWS D1.2
Structural Welding - Aluminum
Welding
Limits:
Limited to non-flight ground support hardware only
AWS D1.6
Structural Welding - Stainless Steel
Welding
Limits:
Limited to non-flight ground support hardware only
AWS D17.1
Fusion Welding for Aerospace Applications
Welding
Limits:
Limited to non-flight ground support hardware only
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Type 1 Only
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings