| Specification | Process Description | Category | Limits |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: Limited to Aluminum and Titanium only |
| ACS-PRS-2151 | Process Specification for Sealing, Integral Fuel Tank and Fuel Cell Cavity | Finishes/Coatings | Limits: Limited to pre-measured sealant dispensing cartridges (Semkits) Not approved for Appendix A |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Limited to acid etch only. Excludes Appendices |
| ACS-PRS-6002.01 | Process Specification for Contamination Free Hole Preparation, Drilling, Machining and Trimming of Composites and Composite/Metallic Structures | Composites | Limits: Limited to composite drilling only |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Type I, Method A, Sensitivity Level 3, Form D, and Not approved for Appendix A & B. |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method 1 Type 2 & 6 only. |
| ASTM A967 | Chemical Passivation Treatments for Stainless Steel Parts | Chemical Processing | Limits: Nitric 1 & 2 solution only. |
| ASTM B600 | Descaling & Cleaning Titanium and Titanium Alloy Surfaces | Chemical Processing | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: Type I, Method A, Sensitivity Level 3, Form d. |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| AWS D:17.1 | Fusion Welding for Aerospace Applications | Welding | Limits: Limited to non-flight ground support hardware only |
| AWS D1.1 | Structural Steel Welding - Steel | Welding | Limits: Limited to non-flight ground support hardware only |
| AWS D1.2 | Structural Welding - Aluminum | Welding | Limits: Limited to non-flight ground support hardware only |
| AWS D1.6 | Structural Welding - Stainless Steel | Welding | Limits: Limited to non-flight ground support hardware only |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Type 1 Only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings |