Mitchell Laboratories Inc - NADCAP Approved
90051777
Independent Processor
7707 Bequette Ave
Pico Rivera, CA 90660 United States
Phone: (562) 949-6144
Fax: (562) 949-7584
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
29259-18
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
29259-24
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to etching aluminum. Ref. RCI 106903
ACS-PRS-7001
Ultrasonic Inspection of Composites and Bonded Assemblies
Non-Destructive Testing
Limits:
None
ACS-PRS-7003
Eddy Current Inspection for Defects
Non-Destructive Testing
Limits:
None
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
None
ACS-PRS-7010
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
AMS 2630
Inspection, Ultrasonic, Product over 0.5 Inch (12.7mm) Thick *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.
Non-Destructive Testing
Limits:
None
AMS 2631
Ultrasonic Inspection Titanium and Titanium Alloy Bar and Relief *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.
Non-Destructive Testing
Limits:
None
AMS-STD-2154
Inspection, Ultrasonic, Wrought Metals, Process for *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.
Non-Destructive Testing
Limits:
None
ASTM B594
Ultrasonic Inspection of Aluminum-Alloy Wrought Products. *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.
Non-Destructive Testing
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
ASTM E1444
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
GSS 16101
Ultrasonic Inspection, Low Alloy Steel and Stainless Steels
Non-Destructive Testing
Limits:
None
LMA-PC002
Eddy Current Inspection
Non-Destructive Testing
Limits:
None
MPD 1074
Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
RCI #R106903 allows supplier to use alternate solution for aluminum pre-pentrant etch as noted in ML-600-1
T-103
Penetrant Inspection
Non-Destructive Testing
Limits:
None
T-133
Ultrasonic Inspection of Wrought Metals
Non-Destructive Testing
Limits:
None
T-170
Ultrasonic Inspection of Finished-Machined Parts
Non-Destructive Testing
Limits:
None