Alloy Processing - NADCAP Approved
90048650
Independent Processor
1900 W Walnut St
Compton, CA 90220-5019 United States
Phone: (310) 635-9995
Fax: (310) 635-9936
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
2ZZP00001
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing type
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
Not approved for dry developer
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Non-Destructive Testing
Limits:
Internal support only
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
GP 17 G
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to aluminum and aluminum alloys
GSS 14600
Polysulfide Rubber Coating, Appication Of
Miscellaneous
Limits:
None
GSS 4306
Integral Fuel Tank Coating (MILC27725) Application of
Chemical Processing
Limits:
Approved for room temperature cure of 50°F to 100°F and a relative humidity of less than 85%
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Force cure per approved RCI BR 140383
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
GSS 5310
Peening of Ferrous and Non-Ferrous Alloys
Miscellaneous
Limits:
None
GSS 5314
Peen Forming of Ferrous and Non-Ferrous Alloys
Miscellaneous
Limits:
None
GT 23 A
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Limited for the E-2 Program, to only use: A ‘Dilute Chromate’ seal approved by M&P on RC/I #BR650489.
MPD 1074
Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
Substitution for processing solutions authorized per approved RCI BR 617747