| Specification | ProcessDescription | Category | SpecLimits |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing type | |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: None |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Not approved for dry developer |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: Internal support only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: Limited to aluminum and aluminum alloys |
| GSS 14600 | Polysulfide Rubber Coating, Appication Of | Miscellaneous | Limits: None |
| GSS 4306 | Integral Fuel Tank Coating (MILC27725) Application of | Chemical Processing | Limits: Approved for room temperature cure of 50°F to 100°F and a relative humidity of less than 85% |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Force cure per approved RCI BR 140383 |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GSS 5310 | Peening of Ferrous and Non-Ferrous Alloys | Miscellaneous | Limits: None |
| GSS 5314 | Peen Forming of Ferrous and Non-Ferrous Alloys | Miscellaneous | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Limited for the E-2 Program, to only use: A ‘Dilute Chromate’ seal approved by M&P on RC/I #BR650489. |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: Substitution for processing solutions authorized per approved RCI BR 617747 |