Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

  • Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
  • All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
  • At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.
    • First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
    • Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
    • The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.
For any questions, contact:

Warning:    Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

 


 
Premier Processing, LLC - NADCAP Approved
90122537
Independent Processor
3002 W Pawnee ST
Wichita, KS 67213 United States
Phone: 316-371-4674
Fax:
Selected sector: AS

Specification
Process Description
Category
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing types

Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
None

Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None

Hardness and Conductivity Testing
Miscellaneous
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001

Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
Limited to normal control non-critical parts only

Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Aluminum only

Application and Control of Organic Finishes
Chemical Processing
Limits:
Limited to paint booth A only

Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only

Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Limited to Types I, IB, IC, and IIB.