Ozark Mountain Technologies, Inc. - NADCAP Approved
90052095
Independent Processor
106 Midland Drive
Cuba, MO 65453 United States
Phone: (573) 885-3018
Fax: (573) 885-3029
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
2ZZP00001
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
Type I, Method A, Sensitivity Level 3, Form d
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Force Cure per Approved RCI BR 631876
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
LMA-PC009
Hardness and Conductivity Testing
Miscellaneous
Limits:
None
LMA-PC201
Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
Facility requalification was conducted the week of March 14, 2022. Based on the requirements called out in LMA-PC201, Appendix A. The following personnel successfully completed qualification demonstration:Tracy Roseman..stamp # 747 Matt Eoff..stamp # 466, Dustin Rolens..stamp # 1054 This task was accomplished using procedure # STP-05-8.2.4, Revision U in conjunction with critical parts planning template. Expires 03/2025
LMA-PG001
Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Aluminum only
LMA-PJ264
Application and Control of Organic Finishes
Chemical Processing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings.