| Specification | ProcessDescription | Category | SpecLimits |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 | |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: Type I, Method A, Sensitivity Level 3, Form d |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Force Cure per Approved RCI BR 631876 |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| LMA-PC009 | Hardness and Conductivity Testing | Miscellaneous | Limits: None |
| LMA-PC201 | Fluorescent Penetrant Inspection of Metallic Parts & Materials | Non-Destructive Testing | Limits: Facility requalification was conducted the week of March 14, 2022. Based on the requirements called out in LMA-PC201, Appendix A. The following personnel successfully completed qualification demonstration:Tracy Roseman..stamp # 747 Matt Eoff..stamp # 466, Dustin Rolens..stamp # 1054 This task was accomplished using procedure # STP-05-8.2.4, Revision U in conjunction with critical parts planning template. Expires 03/2025 |
| LMA-PG001 | Etch/Cleaning Prior to Penetrant Inspection | Chemical Processing | Limits: Aluminum only |
| LMA-PJ264 | Application and Control of Organic Finishes | Chemical Processing | Limits: Approval based on QCS-001 and subject to the limitations listed on QCS-001 |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings. |