Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

  • Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
  • All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
  • At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.
    • First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
    • Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
    • The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.
For any questions, contact:

Warning:    Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

 


 
MAGNETIC INSPECTION LABORATORY INC - NADCAP Approved
90051537
Independent Processor
1401 GREENLEAF AVENUE
ELK GROVE VILLAGE , IL 60007 United States
Phone: 18474374488
Fax: 847-437-4538
Selected sector: AS

Specification
Process Description
Category
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Method 1 only, Type 1,2,3,6,7,8

Chemical Passivation Treatments for Stainless Steel Parts
Chemical Processing
Limits:
Nitric only Type 1,2,3,4,5

Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
In-house testing only

Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None

Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None

Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
None

Chemical Milling of Steel
Chemical Processing
Limits:
RCI 038981 was dispositioned to allow use of alternate solution, excluding periodic analysis IAW supplier procedure 24 MF 10 (5/24/06)

Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Limited to air dry only. Force cure required NGAS approval per RCI

Coating, Polyurethane, Application of
Chemical Processing
Limits:
None

Acid Cleaning of Ferrous Alloys
Chemical Processing
Limits:
Limited to passivation only

Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None

Chemical Milling of Ferrous & Nickel Base Alloy
Chemical Processing
Limits:
None

Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only

Finishes Organic, Weapons System, Application and Control of
Chemical Processing
Limits:
None

Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
5% sodium or potassium dichromate seal is required when Mil-A-8625, Type II anodize is called out on C-2, E-2C/D, EA-6B, EA-18G or E-8 (Jstars) engineering drawings.

Magnetic Particle Method of Inspection for Non-Destructive Test
Non-Destructive Testing
Limits:
None