NORTH EAST FINISHING CO - NADCAP Approved
90051986
Independent Processor
245 RALPH AV
COPIAGUE , NY 11726 United States
Phone: 6317898000
Fax: 631-789-8094
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
29259-18
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
Limited to Aluminum Alloy parts and High Sensitivity, Level 3 - Critical parts as specified by the Engineering drawing or planning
AMS 2700
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Limited to Type 1, Type 2, Type 3
ASTM A967
Chemical Passivation Treatments for Stainless Steel Parts
Chemical Processing
Limits:
Limited to Nitric 1
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
GP 17 G
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
Limited to Aluminum Alloy Parts
GSS 14600
Polysulfide Rubber Coating, Appication Of
Miscellaneous
Limits:
None
GSS 4306
Integral Fuel Tank Coating (MILC27725) Application of
Chemical Processing
Limits:
None
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Force Air Drying Cycles shall be in accordance with RC/I R631876 (254304).
GSS 4407
Application of Lacquers: Acrylic
Chemical Processing
Limits:
Utilizing Approved Product Substitution per GSS 4510
GSS 4507
Coating, Fuel and Oil Resistant for Polycarbonate Surfaces: App. Of
Chemical Processing
Limits:
None
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
GSS 7021
Acid Cleaning of Ferrous Alloys
Chemical Processing
Limits:
None
GSS 8060
Brush Plating of Ferrous and Nonferrous Alloys
Chemical Processing
Limits:
None
GT 23 A
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Approved for Chromic Acid Anodize, Type I & Type IB and Sulfuric Acid Anodize, Type II and Type IIB. 5% Sodium Dichromate seal is required when MIL-PRF- 8625 is called out for anodizing on the AEW/AGS Engineering Drawing.
MIL-STD-865
Selective (Brush Plating) Electrodeposition
Chemical Processing
Limits:
None
MPD 1074
Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
Limited to Method III-B per RCI R601373