| Specification | ProcessDescription | Category | SpecLimits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: Limited to Aluminum Alloy parts and High Sensitivity, Level 3 - Critical parts as specified by the Engineering drawing or planning |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Limited to Type 1, Type 2, Type 3 |
| ASTM A967 | Chemical Passivation Treatments for Stainless Steel Parts | Chemical Processing | Limits: Limited to Nitric 1 |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: Limited to Aluminum Alloy Parts |
| GSS 14600 | Polysulfide Rubber Coating, Appication Of | Miscellaneous | Limits: None |
| GSS 4306 | Integral Fuel Tank Coating (MILC27725) Application of | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Force Air Drying Cycles shall be in accordance with RC/I R631876 (254304). |
| GSS 4407 | Application of Lacquers: Acrylic | Chemical Processing | Limits: Utilizing Approved Product Substitution per GSS 4510 |
| GSS 4507 | Coating, Fuel and Oil Resistant for Polycarbonate Surfaces: App. Of | Chemical Processing | Limits: None |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GSS 7021 | Acid Cleaning of Ferrous Alloys | Chemical Processing | Limits: None |
| GSS 8060 | Brush Plating of Ferrous and Nonferrous Alloys | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Approved for Chromic Acid Anodize, Type I & Type IB and Sulfuric Acid Anodize, Type II and Type IIB. 5% Sodium Dichromate seal is required when MIL-PRF- 8625 is called out for anodizing on the AEW/AGS Engineering Drawing. |
| MIL-STD-865 | Selective (Brush Plating) Electrodeposition | Chemical Processing | Limits: None |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: Limited to Method III-B per RCI R601373 |