Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

  • Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
  • All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
  • At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.
    • First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
    • Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
    • The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.
For any questions, contact:

Warning:    Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

 


 
Barry Avenue Plating Co. Inc. - NADCAP Approved
90008061
Independent Processor
2210 Barry Ave
West Los Angeles, CA 90064 United States
Phone: (310) 478-0078
Fax: (310) 312-0702
Selected sector: AS

Specification
Process Description
Category
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None

Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None

Penetrant Inspection
Non-Destructive Testing
Limits:
None

Plating, Electroless Nickel
Chemical Processing
Limits:
None

Plating, Silver Nickel Strike, High Bake
Chemical Processing
Limits:
None

Plating, Silver for High Tempe
Chemical Processing
Limits:
None

Silver Plating Copper Strike-l
Chemical Processing
Limits:
None

Copper Plating (Electrodeposited)
Chemical Processing
Limits:
None

Hard Anodic Coating treatement of Al Al Alloys
Chemical Processing
Limits:
None

Anotic Treatment of AL Alloys, Chromic Acid
Chemical Processing
Limits:
None

Anodic Treatment of Al Alloys (Sulfuric Acid)
Chemical Processing
Limits:
None

Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Type 2,6,7

Plating - Nickel - Electroless
Chemical Processing
Limits:
None

Nickel Plating (Electrodeposited)
Chemical Processing
Limits:
None

Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
None

Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
None

Chemical Passivation Treatments for Stainless Steel Parts
Chemical Processing
Limits:
NITRIC 1, 2, 3

Standard Practice for Operating Salt Spray (Fog) Apparatus
Non-Destructive Testing
Limits:
Internal Lab Only

Electrodeposited Coatings of Tin
Chemical Processing
Limits:
None

Zinc on Iron and Steel, Electrodeposited Coatings of
Chemical Processing
Limits:
None

Standard Spec for Electrodeposited Coatings of Silver for Engineering Use
Finishes/Coatings
Limits:
None

Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
Chemical Processing
Limits:
None

Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None

Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None

Cleaning Prior to Inspection
Chemical Processing
Limits:
Limited to Methods 1, 2, 3, 4, 5, 6, 9, 10 and Oakite 61B.

Primer MIL-P-85582, Epoxy, Voc Compliant, Application of
Chemical Processing
Limits:
None

Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None

Hard Anodic Coating for Aluminum Alloys
Chemical Processing
Limits:
None

Sulfuric Acid Anodic Coatings for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None

Sulfuric Acid Anodizing of Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None

Cadmium Plating Parts by Electrodeposition (Less Than 220,000 psi), Control
Chemical Processing
Limits:
None

Application of Rust Inhibiting Primer TTP664
Chemical Processing
Limits:
None

Electroless Nickel Coatings (Parts Less Than 220,000 psi)
Chemical Processing
Limits:
None

Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
Approved for aluminum alloy parts only

Integral Fuel Tank Coating (MILC27725) Application of
Chemical Processing
Limits:
None

Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Approved for air cure only

Coating, Polyurethane, Application of
Chemical Processing
Limits:
None

Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None

Penetrant Inspection
Non-Destructive Testing
Limits:
None

Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None

L-6
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Chemical Processing
Limits:
None

L-7
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Chemical Processing
Limits:
None

Copper Plating -(Electrodeposited)
Chemical Processing
Limits:
None

Plating - Nickel - Electroless
Chemical Processing
Limits:
None

Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only

LUBRICANT, SOLID FILM, AIR-CURED, CORROSION INHIBITING,
Chemical Processing
Limits:
None

Lubricants, Solid Film, Hot Cured, Corrosion Inhibiting, NATO Code Number
Chemical Processing
Limits:
None

Dry Film Lube Superseded by AS5272 for Ty I & II only
Chemical Processing
Limits:
None

Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
5% sodium or potassium dichromate seal is required when Mil-A-8625, Type II anodize is called out on C-2, E-2C/D, EA-6B, EA-18G or E-8 (Jstars) engineering drawings.

Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
RCI #R105587 approves supplier to use their existing etch solutions in lieu of those called out in MPD 1074