AAA PLATING & INSPECTION INC - NADCAP Approved
90024568
Independent Processor
424 E DIXON ST
COMPTON , CA 90222-1420 United States
Phone: 310-637-1066
Fax: 310-637-5283
Selected sector: AS
Back
Printable View
Export To Excel
Specification
ProcessDescription
Category
29259-18
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
29259-24
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
2ZZP00001
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
ACS-PRS-1053
Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
None
ACS-PRS-2204
Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
Limited to type 1 only Not approved for Appendix A and B
ACS-PRS-7005
Penetrant Inspection
Non-Destructive Testing
Limits:
None
ACS-PRS-7010
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
AMS 2700
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Limits: Limited to Method 1, Types 1, 2, & 6
AMS-C-8837
Cadmium Plating (Vacuum Deposited)
Chemical Processing
Limits:
Limits: Limited to Type II
AMS-QQ-P-416
Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
None
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Non-Destructive Testing
Limits:
None
ASTM E1417
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
ASTM E1444
Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None
C-17
Cleaning Prior to Inspection
Chemical Processing
Limits:
Limits: Limited to Methods 1,2,4,5,7,9,10
F-103
Phosphoric Acid Anodic Coatings for Aluminum
Chemical Processing
Limits:
Deviation of Chemicals approved per RCI M R 916810
FP-153
Primer MIL-P-85582, Epoxy, Voc Compliant, Application of
Chemical Processing
Limits:
None
FP-28
Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
FP-59
Sulfuric Acid Anodic Coatings for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
FP-79
Passivation of Corrosion and Heat Resistant Steel and Nickel Alloys
Chemical Processing
Limits:
None
FP-87
Sulfuric Acid Anodizing of Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
FP-92
Cadmium Plating Parts by Electrodeposition (Less Than 220,000 psi), Control
Chemical Processing
Limits:
None
GP 17 G
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
None
GP17R
Procedure Ion Vapor Deposited Aluminum Coating
Finishes/Coatings
Limits:
Using approved RC/I BR190022
GSS 4310
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Force cure per approved RC/I BR140383, BR631876
GSS 4407
Application of Lacquers: Acrylic
Chemical Processing
Limits:
GP 110 H, acrylic lacquer was authorized to be substituted by GP 20 A polyurethane per GS 30 BF, sheet 45
GSS 4510
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
GSS 5100
Heat Treatment of Low Alloy Steel
Heat Treat
Limits:
Limited to stress relief only
GSS 7015
Cleaning and Descaling of Titanium and Titanium Alloys
Chemical Processing
Limits:
None
GSS 7021
Acid Cleaning of Ferrous Alloys
Chemical Processing
Limits:
None
GSS 8056
Cadmium Plating - Vacuum Deposited
Chemical Processing
Limits:
Deviation approved per RCI BR108952
GSS 8060
Brush Plating of Ferrous and Nonferrous Alloys
Chemical Processing
Limits:
None
GT 23 A
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
IT-60
Penetrant Inspection
Non-Destructive Testing
Limits:
None
IT-61
Magnetic Particle Inspection
Non-Destructive Testing
Limits:
None
LMA-PC201
Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
Fracture Critical Parts approval per LMA QCS-001. Expires 02/28/2028.Inspectors Qualified for Fracture Critical Components are: Pedro Mora Level 3, Stamp #P7. Cesar Ibarra Level 2, Stamp #P5. Harpreet Toora Level 2, Stamp #P1
LMA-PG001
Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
LMA-PH016
Conversion Coating of Titanium Alloys
Chemical Processing
Limits:
Limits to chemical conversion method MIL-C-5541 only
LMA-PJ264
Application and Control of Organic Finishes
Chemical Processing
Limits:
Approval based on QCS-001 and subject to the limitations listed on QCS-001
MIL-DTL-18264
Finishes Organic, Weapons System, Application and Control of
Chemical Processing
Limits:
None
MIL-DTL-5541
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
MIL-DTL-83488
Coating, Aluminum, High Purity (IVD)
Finishes/Coatings
Limits:
None
MIL-F-18264
Finishes Organic, Weapons System, Application and Control of
Chemical Processing
Limits:
None
MIL-PRF-46010
Dry Film Lube Superseded by AS5272 for Ty I & II only
Chemical Processing
Limits:
None
MIL-PRF-8625
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Dichromate seal is required when MIL-PRF-8625 Type II anodize is called out on engineering drawings
MIL-STD-865
Selective (Brush Plating) Electrodeposition
Chemical Processing
Limits:
None
MPD 1074
Cleaning of Aluminum Alloy Parts
Chemical Processing
Limits:
Deviation approved per RCI R108952
MPD 1183
Pickling of Precipitation-Hardening Steel
Chemical Processing
Limits:
Deviation approved per RC/I #MR 918639
NGT23K
Magnetic Particle Method of Inspection for Non-Destructive Test
Non-Destructive Testing
Limits:
None
R-229
Applying Structural Adhesive Primer
Chemical Processing
Limits:
None