Supplier Report

Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.

First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.

For any questions, contact:

For NGAS:

Gregory Hall, Cell - (316) 303-7492 or at Gregory.Hall@ngc.com
Robin Frenzel at Office - (516) 575-1977 or at Robin.Frenzel@ngc.com

For SSSD:

Stephanie Bauer at office (661) 403-2392 or at Stephanie.Bauer@ngc.com
Jose Galvan at Office - (310) 720-9607 or at Jose.Galvan@ngc.com

For SDS:

Adam Birenbaum at Office – (385) 442-1240 or at Adam.Birenbaum@ngc.com
Larry Freeze at Office – (385) 442-0574 or at Larry.Freeze@ngc.com

Warning: Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

Elbit Systems Cyclone Ltd - NADCAP Approved
90054056
Manufacturer
1 Cyclone Rd Bar Lev Ind Zone
Karmiel, 20100 Israel
Phone: 972-4-9960871
Fax:

Selected sector: AS

Specification

ProcessDescription

Category

Process Specification for the Manufacture and Quality Control of Non-Specific Carbon/Epoxy Part Families Fabricated from LMA-MA002 and/or LMA-MB002 Material

Miscellaneous

Limits:

None

Bonding and Cobonding Parts with Epoxy Materials

Composites

Limits:

None

Standard Practice for Operating Salt Spray (Fog) Apparatus

Miscellaneous

Limits:

None

Ultrasonic Testing

Non-Destructive Testing

Limits:

None

Hardness and Conductivity Testing

Miscellaneous

Limits:

None

Fluorescent Penetrant Inspection of Metallic Parts & Materials

Non-Destructive Testing

Limits:

Includes testing of Critical Parts. The processing of “Critical Parts” is limited to the following personnel who were tested and passed: Hirbawe Faris Employee # CY01413 #61 Gamliel Hanany Employee # CY01174 #27 There are no other changes to their audit schedule or approvals. Approval to process “Critical Parts” is good for 3 years. EXPIRES: June 2025

Radiographic Inspection

Non-Destructive Testing

Limits:

None

Etch/Cleaning Prior to Penetrant Inspection

Chemical Processing

Limits:

Limited to etching Aluminum only

Application and Control of Organic Finishes

Chemical Processing

Limits:

None

Anodic Coatings For Aluminum and Aluminum Alloys

Chemical Processing

Limits:

Limited to Type 1 and 1b