Connell Processing Inc. -
NADCAP Approved
90049630
Independent Processor
3094 N Avon St
Burbank, CA 91504 United States
Phone: (818) 845-7953
Fax: (818) 845-8083
90049630
Independent Processor
3094 N Avon St
Burbank, CA 91504 United States
Phone: (818) 845-7953
Fax: (818) 845-8083
Selected sector: AS
Specification
ProcessDescription
Category
Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Limited to Type 2 and 6 Only
Chemical Passivation Treatments for Stainless Steel Parts
Chemical Processing
Limits:
Limited to Nitric 1 & 2 only
Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
In House Testing Only
Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None
Cleaning Prior to Inspection
Chemical Processing
Limits:
Limited to Cleaning of Aluminum, Methods 1 and 2 Only.
Descaling Titanium
Chemical Processing
Limits:
Limited to mechanical cleaning only
Primer MIL-P-85582, Epoxy, Voc Compliant, Application of
Chemical Processing
Limits:
None
Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
Sulfuric Acid Anodic Coatings for Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
Passivation of Corrosion and Heat Resistant Steel and Nickel Alloys
Chemical Processing
Limits:
None
Sulfuric Acid Anodizing of Aluminum and Aluminum Alloys
Chemical Processing
Limits:
None
Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
None
Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
Force Cure process approved per RC/I BR12321.
Application of Lacquers: Acrylic
Chemical Processing
Limits:
Supplier is utilizing GSS 4510 as an approved substitute
Coating, Polyurethane, Application of
Chemical Processing
Limits:
None
Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None
Penetrant Inspection
Non-Destructive Testing
Limits:
Aluminum only,
Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting
Chemical Processing
Limits:
None
Finishes Organic, Weapons System, Application and Control of
Chemical Processing
Limits:
None
Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 only
Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Limits: 5% sodium or potassium dichromate seal is required when Mil-PRF-8625, anodize is called out on engineering drawings.