Supplier Report

Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.

First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.

For any questions, contact:

For NGAS:

Gregory Hall, Cell - (316) 303-7492 or at Gregory.Hall@ngc.com
Robin Frenzel at Office - (516) 575-1977 or at Robin.Frenzel@ngc.com

For SSSD:

Rigo Aguiniga, Cell - (424) 237-4403 or at Rigoberto.Aguiniga@ngc.com
Jose Galvan at Office - (310) 720-9607 or at Jose.Galvan@ngc.com

For SDS:

Adam Birenbaum at Office – (385) 442-1240 or at Adam.Birenbaum@ngc.com
Larry Freeze at Office – (385) 442-0574 or at Larry.Freeze@ngc.com

Warning: Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

Lubeco Inc - NADCAP Approved
90051466
Independent Processor
6859 Downey Ave
Long Beach, CA 90805 United States
Phone: (562) 602-1791
Fax: (562) 633-4078

Selected sector: AS

Specification

ProcessDescription

Category

Anodic Coating

Chemical Processing

Limits:

Limited to Type II, not approved for Propellant Compatibility

Passivation Treatments for Corrosion-Resistant Steel

Chemical Processing

Limits:

Method 1, Type 1, 2, 6, 7, 8

Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on

Chemical Processing

Limits:

Limited to Type VI only

Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification. Superseding MIL-PRF-46010 for Types I & II only

Chemical Processing

Limits:

None

Chemical Passivation Treatments for Stainless Steel Parts

Chemical Processing

Limits:

Limited to Nitric 1, 2, 3, & 4 only

Passivating CRES Alloys.

Chemical Processing

Limits:

AMS2700, Type 2, 6, 7, & 8 can be used in place of F-116

Paints - Primer, Topcoats, Dry Film Lubricants

Chemical Processing

Limits:

None

Chemical Conversion Coatings for Aluminum and Aluminum Alloy

Chemical Processing

Limits:

Limited to Type 1 only

Dry Film Lube Superseded by AS5272 for Ty I & II only

Chemical Processing

Limits:

None

Lubricant, Solid Film, Air Cured (Corrosion Inhibiting)

Chemical Processing

Limits:

None

Anodic Coatings For Aluminum and Aluminum Alloys

Chemical Processing

Limits:

Dichromate seal is required whenMil-PRF-8625 is called out on engineering drawings.