Supplier Report

Supplier Quality (SQ) from Northrop Grumman Aeronautics System Sector (NGAS), Strategic Space Systems Division (SSSD) of the Space Systems Sector (SP) and the Strategic Deterrent Systems (SDS) division of the Defense Systems Sector (DS) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.

First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.

For any questions, contact:

For NGAS:

Gregory Hall, Cell - (316) 303-7492 or at Gregory.Hall@ngc.com
Robin Frenzel at Office - (516) 575-1977 or at Robin.Frenzel@ngc.com

For SSSD:

Rigo Aguiniga, Cell - (424) 237-4403 or at Rigoberto.Aguiniga@ngc.com
Jose Galvan at Office - (310) 720-9607 or at Jose.Galvan@ngc.com

For SDS:

Adam Birenbaum at Office – (385) 442-1240 or at Adam.Birenbaum@ngc.com
Larry Freeze at Office – (385) 442-0574 or at Larry.Freeze@ngc.com

Warning: Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

BODYCOTE THERMAL PROCESSING INC - NADCAP Approved
90041109
Independent Processor
2900 S SUNOL DR
VERNON , CA 90023 United States
Phone: (323) 264-0111
Fax: 323-268-9897

Selected sector: SP-SSSD

Specification

ProcessDescription

Category

Heat Treatment Precipitation-Hardening CRES and Maraging Steel Parts

Heat Treat

Limits:

None

Heat Treatment Nickel Alloy and Cobalt Alloy Parts

Heat Treat

Limits:

None

Heat Treatment of Steel Raw Materials

Heat Treat

Limits:

None

Heat Treatment of Titanium and Titanium Alloys

Heat Treat

Limits:

None

Titanium Alloys

Space

Limits:

None

Heat Treatment of Iron-Nickel Alloys, Low CTE

Heat Treat

Limits:

-1 and -2, Limited to anneal/quench and stress relieve. Air furnace only, cannot process finished parts. Lowest calibration of furnaces is 300°F.

PREP FOR THE APPL OF ADHES. COAT. SEALANTS

Space

Limits:

-35