Supplier Report

Supplier Quality (SQ) from Northrop Grumman Aeronautics System Sector (NGAS), Strategic Space Systems Division (SSSD) of the Space Systems Sector (SP) and the Strategic Deterrent Systems (SDS) division of the Defense Systems Sector (DS) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
At the Top RH side of the site is a “Helpful Links” button that has 7 links. See Below for 4 specific ones.

First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
Third link is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
Fourth link provides instructions for accessing NDT technique approvals by, "Processor and by Part Number".

For any questions, contact:

For NGAS:

Gregory Hall at Cell - (316) 303-7492 or at Gregory.Hall@ngc.com
Paul Diaz at Office - (310) 332-0170 or at Paul.Diaz@ngc.com

For SSSD:

Rigo Aguiniga at Cell - (424) 237-4403 or at Rigoberto.Aguiniga@ngc.com
Ed Lua at Office - (310) 944-8819 or at Eduardo.Lua@ngc.com

For SDS:

Email requests of (Q145F01) for additions to the SDS ASPL to specialprocessrequest@ngc.com
David G. Johnson at Office – (385) 390-9145 or at David.Johnson8@ngc.com
Drew Sikat at Office – (385) 383-5529 or at Drew.Sikat@ngc.com
DJ Meyerhoffer at Office – (385) 390-7798 or at DeJason.Meyerhoffer@ngc.com

Warning: Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

Galvair Srl - NADCAP Approved
90125444
Independent Processor
Via T. Edison, 10
Barberino del Mugello, Firenze, 50031 Italy
Phone: (+39) 055-842-5835
Fax:

Selected sector: AS

Specification

ProcessDescription

Category

Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements

Limits:

Approval based on QCS-001 and subject to the limitations listed on the QCS-001 website

Passivation Treatments for Corrosion-Resistant Steel

Chemical Processing

Limits:

Limited to Method 1, Type 2 and 6 only

Chemical Conversion Coatings for Aluminum and Aluminum Alloy

Chemical Processing

Limits:

Approval based on QCS-001 and subject to the limitations listed on the QCS-001 website

Anodic Coatings For Aluminum and Aluminum Alloys

Chemical Processing

Limits:

Approval based on QCS-001 and subject to the limitations listed on the QCS-001 website