Supplier Report

Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.

First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.

For any questions, contact:

For NGAS:

Gregory Hall, Cell - (316) 303-7492 or at Gregory.Hall@ngc.com
Robin Frenzel at Office - (516) 575-1977 or at Robin.Frenzel@ngc.com

For SSSD:

Rigo Aguiniga, Cell - (424) 237-4403 or at Rigoberto.Aguiniga@ngc.com
Jose Galvan at Office - (310) 720-9607 or at Jose.Galvan@ngc.com

For SDS:

Adam Birenbaum at Office – (385) 442-1240 or at Adam.Birenbaum@ngc.com
Larry Freeze at Office – (385) 442-0574 or at Larry.Freeze@ngc.com

Warning: Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

ND Testing Inc - NADCAP Approved
90077007
Independent Processor
11473 Pacific Ave
FONTANA, CA 92337 United States
Phone: 9099884054
Fax: 909-988-2356

Selected sector: AS

Specification

ProcessDescription

Category

Inspection, Ultrasonic, Product over 0.5 Inch (12.7mm) Thick *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.

Non-Destructive Testing

Limits:

None

Ultrasonic Inspection Titanium and Titanium Alloy Bar and Relief *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.

Non-Destructive Testing

Limits:

None

Passivation Treatments for Corrosion-Resistant Steel

Chemical Processing

Limits:

Limited to Method 2 only (Citric Acid)

Inspection, Ultrasonic, Wrought Metals, Process for *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.

Non-Destructive Testing

Limits:

None

Chemical Passivation Treatments for Stainless Steel Parts

Chemical Processing

Limits:

Limited to Citric Acid Solutions only. (Citric 1 – 4)

Ultrasonic Inspection of Aluminum-Alloy Wrought Products. *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill.

Non-Destructive Testing

Limits:

None

Standard Practice for Liquid Penetrant Testing

Non-Destructive Testing

Limits:

None

Standard Practice for Magnetic Particle Testing

Non-Destructive Testing

Limits:

None

Standard Practice for Radiographic Examination

Non-Destructive Testing

Limits:

None

Standard Practice for Ultrasonic Testing of Wrought Products

Non-Destructive Testing

Limits:

None