Metal Finishing Company Inc - NADCAP Approved
90051682
Independent Processor
1423 S Mclean Blvd
Wichita, KS 57213 United States
Phone: (316) 267-7289
Fax: (316) 267-1450
Selected sector: AS

Specification
ProcessDescription
Category
Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements
Limits:
This spec shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing type

Process Specification for Etching Prior to Penetrant Inspection
Chemical Processing
Limits:
Aluminum, Titanium, CRES

Cleaning and surface preparation of titanium and titanium alloys
Chemical Processing
Limits:
Limits: Excludes Appendix A

Eddy Current Inspection for Defects
Non-Destructive Testing
Limits:
None

Penetrant Inspection
Non-Destructive Testing
Limits:
None

Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
Finishes/Coatings
Limits:
None

Passivation Treatments for Corrosion-Resistant Steel
Chemical Processing
Limits:
Limited to Method 1 Types 2,6, and 8. Humidity Testing only

Plating, Cadmium (Electrodeposited).
Chemical Processing
Limits:
None

Standard Practice for Operating Salt Spray (Fog) Apparatus
Miscellaneous
Limits:
None

Descaling & Cleaning Titanium and Titanium Alloy Surfaces
Chemical Processing
Limits:
None

Standard Practice for Liquid Penetrant Testing
Non-Destructive Testing
Limits:
None

Standard Practice for Magnetic Particle Testing
Non-Destructive Testing
Limits:
None

Procedure, Etching prior to Penetrant Inspection
Chemical Processing
Limits:
None

Application of Primer Coating, Epoxy Polyamide
Chemical Processing
Limits:
None

Fluorescent Penetrant Inspection
Non-Destructive Testing
Limits:
None

Eddy Current Inspection
Non-Destructive Testing
Limits:
Limited to inspection of aluminum and titanium alloys in support of Northrop Grumman MRB activity

Fluorescent Penetrant Inspection of Metallic Parts & Materials
Non-Destructive Testing
Limits:
Facility qualification was conducted based on the requirements called out in LMA-PC201, Appendix A. The following personnel successfully completed qualification demonstration: Micol Stanley …stamp # 26, Miranda Mock…stamp # 28 Brent Earnest…..stamp # 3. Processing of Critical Parts as defined by LMA-PC201 is limited to those individuals named above. Expires 01/2027.

Etch/Cleaning Prior to Penetrant Inspection
Chemical Processing
Limits:
Limits: Aluminum, Titanium, CRES

Conversion Coating of Titanium Alloys
Chemical Processing
Limits:
None

Touch-up Requirements for Chemical and Organic Finishes
Chemical Processing
Limits:
None

Application and Control of Organic Finishes
Chemical Processing
Limits:
None

Chemical Conversion Coatings for Aluminum and Aluminum Alloy
Chemical Processing
Limits:
Limited to Type 1 Only

Dry Film Lube Superseded by AS5272 for Ty I & II only
Chemical Processing
Limits:
None

Anodic Coatings For Aluminum and Aluminum Alloys
Chemical Processing
Limits:
Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings..

Chemical Conversion Coatings & Pretreatment for Ferrous Surfaces
Chemical Processing
Limits:
Limited to Type 1, Methods 1 & 2, Material Class “A”