Supplier Report

Supplier Quality (SQ) from Northrop Grumman Aeronautics Systems (NGAS) and the Strategic Space Systems Division (SSSD) and the Strategic Deterrent Systems (SDS) of the Space Sector (SP) maintain an "Approved Special Processor List" (ASPL) for all NGAS, SSSD and SDS programs. This list can be sorted by Supplier Name, Supplier Number, Country, or Process Specifications and Process Categories.

How to use the ASPL and the enclosed information is bulleted below:

Users must initially select the specific ASPL they are searching within (i.e. Aeronautics Systems, Strategic Space Systems, or Strategic Deterrent Systems). If you are unsure which ASPL to search please verify with your NG Buyer.
All specifications can be selected by selecting Specification (1st button), Category (2nd button), which includes 8 categories and Space Systems Division specifications, or F35 specifications under Program (3rd button).
At the Top RH side of the site is a “Helpful Links” button that has 8 links. See Below for 5 specific ones.

First two links are to Boeing’s ‘D1-4426’ ASPL and Lockheed’s ‘QCS-001’ ASPL.
Third is a “Change Log” that shows when processors are added or removed, or when specifications are added or removed from the processors or the ASPL.
The 4th and 5th are listings of NDT technique approvals; by “Processor and by Part Number”.

For any questions, contact:

For NGAS:

Gregory Hall, Cell - (316) 303-7492 or at Gregory.Hall@ngc.com
Robin Frenzel at Office - (516) 575-1977 or at Robin.Frenzel@ngc.com

For SSSD:

Stephanie Bauer at office (661) 403-2392 or at Stephanie.Bauer@ngc.com
Jose Galvan at Office - (310) 720-9607 or at Jose.Galvan@ngc.com

For SDS:

Adam Birenbaum at Office – (385) 442-1240 or at Adam.Birenbaum@ngc.com
Larry Freeze at Office – (385) 442-0574 or at Larry.Freeze@ngc.com

Warning: Northrop Grumman process specifications contain technical data whose export is restricted by the Arms Export Act (Title 22, U.S.C., Sec 2751 et seq.) or the Export Administration Act (Title 50, U.S.C., App. 24001-240). Violation of these export laws are subject to severe criminal penalties.

AEROPARTS FABRICATING AND - NADCAP Approved
90048491
Independent Processor
722 RIDGE RD
NICKTOWN , PA 15762 United States
Phone: 814-948-6015
Fax: 814-948-6018

Selected sector: AS

Specification

ProcessDescription

Category

Passivation Treatments for Corrosion-Resistant Steel

Chemical Processing

Limits:

Limited to Method 1, Type 6

Heat Treatment of Wrought Aluminum Alloy Parts

Heat Treat

Limits:

Water Quench only

Integral Fuel Tank Coating (MILC27725) Application of

Chemical Processing

Limits:

None

Application of Primer Coating, Epoxy Polyamide

Chemical Processing

Limits:

Limited forced cure cycles per RCI 130786

Application of Lacquers: Acrylic

Chemical Processing

Limits:

Supplier is utilizing GSS 4510 as an approved substitute

Coating, Polyurethane, Application of

Chemical Processing

Limits:

None

Forming and Straightening of Aluminum Alloys

Miscellaneous

Limits:

Limited to cold forming only

Hardness and Conductivity Testing

Miscellaneous

Limits:

None

Touch-up Requirements for Chemical and Organic Finishes

Chemical Processing

Limits:

Paint touch-up only

Application and Control of Organic Finishes

Chemical Processing

Limits:

None

Chemical Conversion Coatings for Aluminum and Aluminum Alloy

Chemical Processing

Limits:

Limited to Type 1 only