| Specification | ProcessDescription | Category | SpecLimits |
| AMS 2728 | Heat Treatment of Wrought Copper Beryllium Alloy Parts | Heat Treat | Limits: None |
| AMS 2759 | General Requirements for Heat Treatment of Steel Parts | Heat Treat | Limits: None |
| AMS 2759/ 1 | Heat Treatment of Carbon and Low-Alloy Steel Parts Min Ten. Str.< 220ksi | Heat Treat | Limits: None |
| AMS 2759/11 | Stress relief of steel parts | Heat Treat | Limits: None |
| AMS 2759/2 | Heat Treatment of Carbon and Low-Alloy Steel Parts Min Ten. Str.> 220ksi | Heat Treat | Limits: None |
| AMS 2759/3 | Heat Treatment Precipitation-Hardening CRES and Maraging Steel Parts | Heat Treat | Limits: None |
| AMS 2759/4 | Heat Treatment Austenitic Corrosion-Resistant Steel Parts | Heat Treat | Limits: None |
| AMS 2759/7 | Carburizing and Heat Treatment of Carburizing Grade Steel Parts | Heat Treat | Limits: None |
| AMS 2761 | Heat Treatment of Steel Raw Materials | Heat Treat | Limits: None |
| AMS 2774 | Heat Treatment Nickel Alloy and Cobalt Alloy Parts | Heat Treat | Limits: None |
| AMS 5659 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions | Heat Treat | Limits: None |
| AMS-H-6875 | Heat Treatment of Steel Raw Materials | Heat Treat | Limits: None |
| AMS-H-7199 | Heat Treatment of Wrought Copper-Beryllium Alloys | Heat Treat | Limits: None |
| ASTM E18 | Standard Test Methods for Tension Testing of Metallic Materials | Materials Testing | Limits: None |
| C-52 | Cleaning Prior to Heat Treat Carbon & Low Alloy Steels | Chemical Processing | Limits: Limited to solvent wipe and alkaline clean only |
| GSS 5100 | Heat Treatment of Low Alloy Steel | Heat Treat | Limits: Limited to furnace nos. 2-H for 4330V alloy only |
| GSS 5102 | Heat Treatment of Wrought Precipitation Hardenable Stainless Steel. See Supplier for Custom 465 | Heat Treat | Limits: Not Approved for Custom 465 |
| H-110 | Heat Treatment of Precipitation Hardening CRES Parts | Heat Treat | Limits: None |
| HT-15 | Heat Treatment of Alloy Steels , Over 260,000 psi | Heat Treat | Limits: None |
| HT-21 | Heat Treatment of Carbon and Alloy Steels up to 200,000 psi | Heat Treat | Limits: None |