| Specification | ProcessDescription | Category | SpecLimits |
| 29259-26 | Radiographic Inspection | Non-Destructive Testing | Limits: None |
| 34-07-00 | Nondestructive Inspection-Penetrant Method | Non-Destructive Testing | Limits: None |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Limits: Not approved for pre-penetrant etching per ACS-PRS-1053 / Not approved for Appendix A & B |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method 1, Type 6 only and Method 2 |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: Limits: In House Testing Only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| ASTM E1742 | Standard Practice for Radiographic Examination | Non-Destructive Testing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: None |
| GSS 4407 | Application of Lacquers: Acrylic | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: 5% sodium or potassium dichromate seal is required when Mil-A-8625, Type II anodize is called out on C-2, E-2C/D, EA-6B, EA-18G or E-8 (Jstars) engineering drawings. |