| Specification | ProcessDescription | Category | SpecLimits |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Limited to Type 2 and 6 Only |
| ASTM A967 | Chemical Passivation Treatments for Stainless Steel Parts | Chemical Processing | Limits: Limited to Nitric 1 & 2 only |
| C-17 | Cleaning Prior to Inspection | Chemical Processing | Limits: Limited to Cleaning of Aluminum, Methods 1 & 2 Only. |
| C-38 | Descaling Titanium | Chemical Processing | Limits: Limited to mechanical cleaning only |
| FP-153 | Primer MIL-P-85582, Epoxy, Voc Compliant, Application of | Chemical Processing | Limits: Approved to use alternate tape per RCI #RB458973 |
| FP-28 | Chemical Conversion Coatings, Colored, for Aluminum and Aluminum Alloys | Chemical Processing | Limits: None |
| FP-59 | Sulfuric Acid Anodic Coatings for Aluminum and Aluminum Alloys | Chemical Processing | Limits: None |
| FP-79 | Passivation of Corrosion and Heat Resistant Steel and Nickel Alloys | Chemical Processing | Limits: None |
| FP-87 | Sulfuric Acid Anodizing of Aluminum and Aluminum Alloys | Chemical Processing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Force Cure process approved per RC/I #BR121321. |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| MIL-DTL-18264 | Finishes Organic, Weapons System, Application and Control of | Chemical Processing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when Mil-PRF-8625 Type II anodize is called out on engineering drawings |