| Specification | ProcessDescription | Category | SpecLimits |
| AMS 2770 | Heat Treatment of Wrought Aluminum Alloy Parts | Heat Treat | Limits: None |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Non-Destructive Testing | Limits: Limited to internal process control activity only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: None |
| GSS 14600 | Polysulfide Rubber Coating, Appication Of | Miscellaneous | Limits: Allowance to use MIL-PRF-81733 Type II extrusion application per RCI R171767 |
| GSS 26100 | Chemical Milling of Aluminum Alloys | Chemical Processing | Limits: None |
| GSS 26300 | Chemical Milling of Titanium and Titanium Alloys | Chemical Processing | Limits: Allowance for alternate part cleaning per RCI 039400 |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Allowance for force cure per RCI R036459 |
| GSS 4407 | Application of Lacquers: Acrylic | Chemical Processing | Limits: Supplier is utilizing GSS 4510 as an approved substitute |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GSS 5150 | Heat Treatment of Titanium and Titanium Alloys | Heat Treat | Limits: Limited to stress relief only |
| GSS 5300 | Forming and Straightening of Aluminum Alloys | Miscellaneous | Limits: Limited to cold forming only |
| GSS 5360 | Forming of Titanium and Titanium Alloys | Miscellaneous | Limits: None |
| GSS 7015 | Cleaning and Descaling of Titanium and Titanium Alloys | Chemical Processing | Limits: GSS 7015 requires NGAS approval only when referenced in one of the following specifications: GSS 5150, GSS 5360, GSS5361, GSS 7022 |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type I only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dilute Chromate Seal is approved per successful testing (TSL-36310-11) for AEW/EW Programs only |