| Specification | ProcessDescription | Category | SpecLimits |
| 2ZZP00001 | Finish Specification for F-35 Weapon System. Note* Approval for this specification is required in conjunction with MIL-PRF-8625 for appropriate anodize seal requirements | Limits: This spec a shall be used in conjunction with MIL-PRF-8625 for appropriate anodize and sealing type | |
| AMS 2404 | Plating, Electroless Nickel | Chemical Processing | Limits: None |
| AMS 2488 | Anodic Coating | Chemical Processing | Limits: Limited to Type 2 |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: None |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: None |
| MIL-PRF-46010 | Dry Film Lube Superseded by AS5272 for Ty I & II only | Chemical Processing | Limits: None |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Limited to Type I, Type IB, and Type III. 5% sodium dichromate seal is required when MIL-A-8625 is called out for anodizing on the AEW/EWS engineering drawing. Type ll, Class 1 only |