| Specification | Process Description | Category | Limits |
| AMS 2430 | Shot Peening, Automatic | Miscellaneous | Limits: None |
| AMS 2460 | Plating, Chromium | Chemical Processing | Limits: None |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Method, 1, Types 2, 6, & 8 only |
| AMS 2759/ 1 | Heat Treatment of Carbon and Low-Alloy Steel Parts Min Ten. Str.< 220ksi | Heat Treat | Limits: None |
| AMS 2759/2 | Heat Treatment of Carbon and Low-Alloy Steel Parts Min Ten. Str.> 220ksi | Heat Treat | Limits: None |
| AMS 2761 | Heat Treatment of Steel Raw Materials | Heat Treat | Limits: None |
| AMS 2770 | Heat Treatment of Wrought Aluminum Alloy Parts | Heat Treat | Limits: None |
| AMS 2772 | Heat Treatment of Aluminum Alloy Raw Materials | Heat Treat | Limits: None |
| AMS-QQ-P-416 | Plating, Cadmium (Electrodeposited). | Chemical Processing | Limits: Type I & II, only. |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: None |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Limited to Types I and II only; 5% sodium or potassium dichromate seal is required when Mil-PRF-8625, Type II anodize is called out on C-2, E-2C/D, EA-6B, EA-18G or E-8 (Jstars) engineering drawings |
| MIL-STD-867 | Temper Etch Inspection | Non-Destructive Testing | Limits: None |