Specification
|
Process Description
|
Category
|
Limits
|
ACS-PRS-2151
|
Process Specification for Sealing, Integral Fuel Tank and Fuel Cell Cavity
|
Finishes/Coatings
|
Limits:
Limits: Brush Coat Sealant per
RC/I R200627 and
Fay & Fillet Seal per
RC/I R42583 only,
Not approved for Appendix A
|
ACS-PRS-5001
|
Curing Procedures for Composite Laminates and Sandwich Assemblies
|
Composites
|
Limits:
|
ACS-PRS-5012
|
Process Specification for Wet Layup of Composite Laminates and Foam Sandwich Structures
|
Composites
|
Limits:
Limited to Type IV only |
ACS-PRS-5017
|
Process Specification Fabrication of Out-of-Autoclave, 350°F Cure, Epoxy Laminates
|
Composites
|
Limits:
None
|
ACS-PRS-5053
|
Machining of Nonmetallic Honeycomb Details
|
Composites
|
Limits:
Limits: Ref: RC/I 419997 for Core Processing Area Requirements per ACS-PRS-8002 Area "D, |
ACS-PRS-5065
|
Process Specification for Fabrication Of 350°F Curing Out-Of-Autoclave Epoxy Composite Structure, Bonded, Cocured, Or Cobonded
|
Composites
|
Limits:
None
|
ACS-PRS-5065.02
|
Installing Inserts, Hardpoints, and Edge Filler in Composite Sandwich Structure
|
Composites
|
Limits:
None
|
ACS-PRS-6002
|
Hole Preparation, Drilling, Mach.,Trimming for Composite/Metallic Structure
|
Composites
|
Limits:
Limits: Not approved for appendix A, B & C. |
ACS-PRS-6002.01
|
Process Specification for Contamination Free Hole Preparation, Drilling, Machining and Trimming of Composites and Composite/Metallic Structures
|
Composites
|
Limits:
None
|
ACS-PRS-7001
|
Ultrasonic Inspection of Composites and Bonded Assemblies
|
Non-Destructive Testing
|
Limits:
Limitation: Manual Hand Held Pulse Echo A-Scan (PEA) and C-Scan (TTU)
Not approved for Appendix A & B.
|
ACS-PRS-7008
|
Translucent Composites, Visual Inspection of
|
Non-Destructive Testing
|
Limits:
None
|
ACS-PRS-7101
|
Non-Destructive Inspection of Composite Structures
|
Non-Destructive Testing
|
Limits:
Limitation: Manual Hand Held Pulse Echo A-Scan (PEA) and C-Scan (TTU |
ACS-PRS-8002
|
Area Requirements for Composite Fabrication
|
Composites
|
Limits:
Limits: Approved for Areas C,D & E only:
RC/I 419997 for Area "D" only
Not Approved for Appenix A & B
|
GSS 11100
|
Glass Fiber Base-Plastic Laminates for Structural Applications (General)
|
Composites
|
Limits:
Limits: Limited to GSS 11101, GSS11102 and GSS 11103 only. |
GSS 11101
|
Glass Fiber Base-Polyester Resin Structural Laminates
|
Composites
|
Limits:
None
|
GSS 11102
|
Glass Fiber Base- Epoxy Resin Structural Laminates
|
Composites
|
Limits:
None
|
GSS 11103
|
Glass Fiber Base- Structural Laminates
|
Composites
|
Limits:
None
|
GSS 20000
|
Structural Adhesive Bonding
|
Composites
|
Limits:
None
|
GSS 22650
|
Adhesive Bonding of Metallic and Non-Metallic, General Purpose
|
Composites
|
Limits:
None
|
GSS 4310
|
Application of Primer Coating, Epoxy Polyamide
|
Chemical Processing
|
Limits:
Limits: Limited to Air Drying only |
GSS 4407
|
Application of Lacquers: Acrylic
|
Chemical Processing
|
Limits:
Limits: Limited to Air Drying only |
GSS 4510
|
Coating, Polyurethane, Application of
|
Chemical Processing
|
Limits:
None
|
GSS 7022
|
Preparation of Surfaces Prior to Structural Adhesive Bonding
|
Chemical Processing
|
Limits:
Limits: Limited to Method VI only |