| Specification | ProcessDescription | Category | SpecLimits |
| ACS-PRS-1053 | Process Specification for Etching Prior to Penetrant Inspection | Chemical Processing | Limits: Deviation approved per RC/I #BR 662234 |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Deviation approved per RC/I #BR 662234 |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Not approved for Appendices |
| ACS-PRS-7010 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: Not approved for Appendices |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Type 2 & 6 only |
| AMS-QQ-P-416 | Plating, Cadmium (Electrodeposited). | Chemical Processing | Limits: None |
| ASTM A967 | Chemical Passivation Treatments for Stainless Steel Parts | Chemical Processing | Limits: Nitric 1 & 2 only |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Non-Destructive Testing | Limits: None |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: Dichromate seal is required when MIL-PRF-8625 Type II anodize is called out on engineering drawings. |