| Specification | Process Description | Category | Limits |
| 367-1200-1479 | Adhesive Bonding for Global Hawk High Altitude Endurance Unmanned Vehicle | Composites | Limits: None |
| ACS-PRS-2151 | Process Specification for Sealing, Integral Fuel Tank and Fuel Cell Cavity | Finishes/Coatings | Limits: None |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Touch-up of acid etch finish on installed parts |
| ACS-PRS-5001 | Curing Procedures for Composite Laminates and Sandwich Assemblies | Composites | Limits: Limited to Autoclave S/N’s 912 and 915 only |
| ACS-PRS-5005 | Fabrication of Laminates, 250F Cure | Composites | Limits: None |
| ACS-PRS-5006 | Fabrication of Carbon Fiber/Epoxy Unidrectional Tape Laminates, 250F Cure | Composites | Limits: None |
| ACS-PRS-5052 | Fabrication of Sandwich Composite Structure | Composites | Limits: Limited to fabrication of NDT standards. Not authorized for production. Does not include splicing or potting. |
| ACS-PRS-5053 | Machining of Nonmetallic Honeycomb Details | Composites | Limits: Limited to fabrication of NDT standards. Not authorized for production. |
| ACS-PRS-5063 | Fabrication of Carbon Fiber Reinforced Low Flow Toughened Epoxy Honeycomb | Composites | Limits: Limited to fabrication of NDT standards. Not authorized for production. |
| ACS-PRS-5064 | Fabrication of Carbon Fiber Reinforced Low Flow Toughened Epoxy Laminates | Composites | Limits: None |
| ACS-PRS-6002 | Hole Preparation, Drilling, Mach.,Trimming for Composite/Metallic Structure | Composites | Limits: None |
| ACS-PRS-7001 | Ultrasonic Inspection of Composites and Bonded Assemblies | Non-Destructive Testing | Limits: None |
| ACS-PRS-7003 | Eddy Current Inspection for Defects | Non-Destructive Testing | Limits: Limited to MRB activity only |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: Approval for HALE programs is limited to localized etch and inspection of Titanium parts per RCI R617765 |
| ACS-PRS-8002 | Area Requirements for Composite Fabrication | Composites | Limits: None |
| ASTM E1742 | Standard Practice for Radiographic Examination | Non-Destructive Testing | Limits: None |