| Specification | ProcessDescription | Category | SpecLimits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| 367-1200-1479 | Adhesive Bonding for Global Hawk High Altitude Endurance Unmanned Vehicle | Composites | Limits: Excludes surface treatment prep for Class A bonds for Aluminum/Stainless Steel. Class B bonds for Carbon/Low Alloy Steels. Ref: RCI R185911 |
| 367-1200-350 | Fabrication of Epoxy Preimpregnated Laminates for GH Unmanned Vehicle | Composites | Limits: None Ref: RCI R020387 |
| ACS-PRS-2204 | Cleaning and surface preparation of titanium and titanium alloys | Chemical Processing | Limits: Limited to Appendix A, ref. RCI R108501 |
| ACS-PRS-5001 | Curing Procedures for Composite Laminates and Sandwich Assemblies | Composites | Limits: Limited to processing that does not require free air cure |
| ACS-PRS-5005 | Fabrication of Laminates, 250F Cure | Composites | Limits: None Ref: RCI R106021 |
| ACS-PRS-5052 | Fabrication of Sandwich Composite Structure | Composites | Limits: None |
| ACS-PRS-5063 | Fabrication of Carbon Fiber Reinforced Low Flow Toughened Epoxy Honeycomb | Composites | Limits: None |
| ACS-PRS-5064 | Fabrication of Carbon Fiber Reinforced Low Flow Toughened Epoxy Laminates | Composites | Limits: None Ref: RCI R193671 |
| ACS-PRS-6002 | Hole Preparation, Drilling, Mach.,Trimming for Composite/Metallic Structure | Composites | Limits: None Ref: RCI R105078, R108694 |
| ACS-PRS-7001 | Ultrasonic Inspection of Composites and Bonded Assemblies | Non-Destructive Testing | Limits: None |
| ACS-PRS-7003 | Eddy Current Inspection for Defects | Non-Destructive Testing | Limits: None |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: None Ref: RCI R628476 |
| ACS-PRS-8002 | Area Requirements for Composite Fabrication | Composites | Limits: None |
| AMS 2770 | Heat Treatment of Wrought Aluminum Alloy Parts | Heat Treat | Limits: Excludes salt baths and glycol quenches |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: Limited to Method VI only |
| MPD 1103 | Cleaning of Titanium and Titanium Alloys | Chemical Processing | Limits: None Ref. RCI R108501, R191187, R128886 |