| Specification | ProcessDescription | Category | SpecLimits |
| 29259-18 | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| 29259-24 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| ACS-PRS-7005 | Penetrant Inspection | Non-Destructive Testing | Limits: |
| ACS-PRS-7010 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| AMS 2430 | Shot Peening, Automatic | Miscellaneous | Limits: None |
| AMS 2700 | Passivation Treatments for Corrosion-Resistant Steel | Chemical Processing | Limits: Limited to Types II & VI |
| AMS-QQ-P-416 | Plating, Cadmium (Electrodeposited). | Chemical Processing | Limits: . |
| AMS-STD-2154 | Inspection, Ultrasonic, Wrought Metals, Process for *NOTE* NGAS ASPL approval is required when testing is performed by a secondary source other than the primary mill. | Non-Destructive Testing | Limits: None |
| ASTM A967 | Chemical Passivation Treatments for Stainless Steel Parts | Chemical Processing | Limits: Limited to Nitric 1, Nitric 2, Nitric 3. Limited to Practice B, C, D, E, F |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus | Miscellaneous | Limits: Limited to testing of in-house processes only |
| ASTM E1417 | Standard Practice for Liquid Penetrant Testing | Non-Destructive Testing | Limits: None |
| ASTM E1444 | Standard Practice for Magnetic Particle Testing | Non-Destructive Testing | Limits: None |
| ASTM E1742 | Standard Practice for Radiographic Examination | Non-Destructive Testing | Limits: None |
| C-17 | Cleaning Prior to Inspection | Chemical Processing | Limits: Limited to Methods 1, 2, 4, 7, 9 and 10. |
| FP-91 | Chromic Acid Anodizing for Aluminum and Aluminum Alloys | Chemical Processing | Limits: 5% sodium or potassium dichromate seal is required when Mil-PRF-8625, Type II anodize is called out C-2, E-2C/D, EA-6B, EA-18G or E-8 (JSTAR) engineering drawings. Not approved for Type III, Hard Anodic Coatings. |
| GP 17 G | Procedure, Etching prior to Penetrant Inspection | Chemical Processing | Limits: None |
| GSS 10300 | Paints - Primer, Topcoats, Dry Film Lubricants | Chemical Processing | Limits: Everlube 620C is the approved product for GSS10300. |
| GSS 19200 | Nital Etch of Low Alloy Steel Parts | Non-Destructive Testing | Limits: None |
| GSS 4306 | Integral Fuel Tank Coating (MILC27725) Application of | Chemical Processing | Limits: None |
| GSS 4310 | Application of Primer Coating, Epoxy Polyamide | Chemical Processing | Limits: Cure schedule per approved RCI BR 0631876. |
| GSS 4510 | Coating, Polyurethane, Application of | Chemical Processing | Limits: None |
| GSS 5100 | Heat Treatment of Low Alloy Steel | Heat Treat | Limits: Limited to stress relief only |
| GSS 5310 | Peening of Ferrous and Non-Ferrous Alloys | Miscellaneous | Limits: None |
| GSS 7021 | Acid Cleaning of Ferrous Alloys | Chemical Processing | Limits: None |
| GSS 8052 | Cadmium Plating (Electrodeposited) for Low Alloy Steel Parts Heat Treated | Chemical Processing | Limits: None |
| GSS 8060 | Brush Plating of Ferrous and Nonferrous Alloys | Chemical Processing | Limits: None |
| GT 23 A | Fluorescent Penetrant Inspection | Non-Destructive Testing | Limits: None |
| G-T501 | Process for Shot Peening | Miscellaneous | Limits: Not approved for Glass Bead Shot. |
| IT-60 | Penetrant Inspection | Non-Destructive Testing | Limits: None |
| IT-61 | Magnetic Particle Inspection | Non-Destructive Testing | Limits: None |
| IT-69 | Nital Etch Inspection of High Strength Steel Parts | Non-Destructive Testing | Limits: None |
| MIL-DTL-5541 | Chemical Conversion Coatings for Aluminum and Aluminum Alloy | Chemical Processing | Limits: Limited to Type 1 only |
| MIL-PRF-46010 | Dry Film Lube Superseded by AS5272 for Ty I & II only | Chemical Processing | Limits: None |
| MIL-PRF-8625 | Anodic Coatings For Aluminum and Aluminum Alloys | Chemical Processing | Limits: 5% sodium or potassium dichromate seal is required when Mil-PRF-8625, Type II anodize is called out on C-2, E-2C/D, EA-6B, EA-18G or E-8 (Jstars) engineering drawings. Not approved for Type III, Hard Anodic Coatings |
| MIL-STD-865 | Selective (Brush Plating) Electrodeposition | Chemical Processing | Limits: None |
| MIL-STD-867 | Temper Etch Inspection | Non-Destructive Testing | Limits: None |
| MPD 1074 | Cleaning of Aluminum Alloy Parts | Chemical Processing | Limits: None |
| MPD 1103 | Cleaning of Titanium and Titanium Alloys | Chemical Processing | Limits: None |
| NGT23K | Magnetic Particle Method of Inspection for Non-Destructive Test | Non-Destructive Testing | Limits: None |