| Specification | ProcessDescription | Category | SpecLimits |
| AMS 2759/ 1 | Heat Treatment of Carbon and Low-Alloy Steel Parts Min Ten. Str.< 220ksi | Heat Treat | Limits: None |
| AMS 2759/11 | Stress relief of steel parts | Heat Treat | Limits: None |
| AMS 2759/2 | Heat Treatment of Carbon and Low-Alloy Steel Parts Min Ten. Str.> 220ksi | Heat Treat | Limits: None |
| AMS 2759/3 | Heat Treatment Precipitation-Hardening CRES and Maraging Steel Parts | Heat Treat | Limits: None |
| AMS 2759/5 | Heat Treatment Martensitic Corrosion Resistant Steel Parts | Heat Treat | Limits: None |
| AMS 2759/6 | Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts | Heat Treat | Limits: None |
| AMS 2759/7 | Carburizing and Heat Treatment of Carburizing Grade Steel Parts | Heat Treat | Limits: None |
| AMS 2761 | Heat Treatment of Steel Raw Materials | Heat Treat | Limits: None |
| AMS 2774 | Heat Treatment Nickel Alloy and Cobalt Alloy Parts | Heat Treat | Limits: None |
| C-18 | Cleaning Prior to Plating Low Alloy Steel | Chemical Processing | Limits: Brulin 815GD is approved for use per RCI 120723 |
| C-20 | Removal of Copper Barrier Coatings - Low Alloy Steel | Chemical Processing | Limits: None |
| C-47 | Abrasive Cleaning | Chemical Processing | Limits: None |
| C-52 | Cleaning Prior to Heat Treat Carbon & Low Alloy Steels | Chemical Processing | Limits: Limited to solvent clean only |
| GSS 5100 | Heat Treatment of Low Alloy Steel | Heat Treat | Limits: Limited to alloys less than 220 KSI. |
| GSS 5102 | Heat Treatment of Wrought Precipitation Hardenable Stainless Steel. See Supplier for Custom 465 | Heat Treat | Limits: Not Approved for Custom 465 |
| H-105 | Heat Treatment of Steel Parts, <220 Ksi | Heat Treat | Limits: None |
| HT-19 | Heat Treatment of Precipitation Hardening Corrosion Resistant Steels | Heat Treat | Limits: Excludes 17-7 PH in the following conditions TH1050, TH1080, and TH1100 |
| HT-21 | Heat Treatment of Carbon and Alloy Steels up to 200,000 psi | Heat Treat | Limits: None |
| HT-22 | Heat Treatment of Low Alloy Steels From 200,000 to 260,000 psi | Heat Treat | Limits: None |